Enable the dpsub device and wire it up to the PS-GTR PHY lanes routed to
the DisplayPort connector.
Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
---
.../arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 93ce7eb81498..4656f25b6b04 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -13,6 +13,7 @@
#include "zynqmp-clk.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU106 RevA";
@@ -69,6 +70,17 @@
status = "okay";
};
+&dpdma {
+ status = "okay";
+};
+
+&dpsub {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&lane1 PHY_TYPE_DP 0 3 27000000>,
+ <&lane0 PHY_TYPE_DP 1 3 27000000>;
+};
+
/* fpd_dma clk 667MHz, lpd_dma 500MHz */
&fpd_dma_chan1 {
status = "okay";
@@ -503,6 +515,10 @@
no-1-8-v;
};
+&serdes {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
