Hi, Yongqiang:
On Fri, 2019-08-30 at 13:58 +0800, CK Hu wrote:
> Hi, Yongqiang:
>
> On Thu, 2019-08-29 at 22:50 +0800, yongqiang....@mediatek.com wrote:
> > From: Yongqiang Niu <yongqiang....@mediatek.com>
> >
> > This patch add ovl0/ovl_2l0 usecase
> > in ovl->ovl_2l0 direct link usecase:
> > 1. the crtc support layer number will 4+2
> > 2. ovl_2l0 background color input select ovl0 when crtc init
> > and disable it when crtc finish
> > 3. config ovl_2l0 layer, if crtc config layer number is
> > bigger than ovl0 support layers(max is 4)
> >
> > Signed-off-by: Yongqiang Niu <yongqiang....@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 38
> > +++++++++++++++++++++++++++++++--
> > 1 file changed, 36 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > index c63ff2b..b55970a 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > @@ -270,6 +270,15 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc
> > *mtk_crtc)
> >
> > for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
> > struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[i];
> > + enum mtk_ddp_comp_id prev;
> > +
> > + if (i > 0)
> > + prev = mtk_crtc->ddp_comp[i - 1]->id;
> > + else
> > + prev = DDP_COMPONENT_ID_MAX;
> > +
> > + if (prev == DDP_COMPONENT_OVL0)
> > + mtk_ddp_comp_bgclr_in_on(comp);
>
> Even though both OVL and OVL_2L implement this function, I think we
> could still call this function for OVL and OVL_2L, and in
> mtk_ovl_bgclr_in_on(), to judge it's OVL or OVL_2L.
As internal discussion, you mention that OVL and OVL_2L both has
bgclr_in function, so I think we should keep bgclr_in function for both
OVL and OVL_2L. And in crtc, always enable bgclr_in for comp[1], so code
here could be
if (i == 1)
mtk_ddp_comp_bgclr_in_on(comp);
Regards,
CK
>
> Regards,
> CK
>
> >
> > mtk_ddp_comp_config(comp, width, height, vrefresh, bpc);
> > mtk_ddp_comp_start(comp);
> > @@ -279,9 +288,18 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc
> > *mtk_crtc)
> > for (i = 0; i < mtk_crtc->layer_nr; i++) {
> > struct drm_plane *plane = &mtk_crtc->planes[i];
> > struct mtk_plane_state *plane_state;
> > + struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
> > + unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
> > + unsigned int local_layer;
> >
> > plane_state = to_mtk_plane_state(plane->state);
> > - mtk_ddp_comp_layer_config(mtk_crtc->ddp_comp[0], i,
> > +
> > + if (i >= comp_layer_nr) {
> > + comp = mtk_crtc->ddp_comp[1];
> > + local_layer = i - comp_layer_nr;
> > + } else
> > + local_layer = i;
> > + mtk_ddp_comp_layer_config(comp, local_layer,
> > plane_state);
> > }
> >
> > @@ -307,6 +325,7 @@ static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc
> > *mtk_crtc)
> > mtk_crtc->ddp_comp[i]->id);
> > mtk_disp_mutex_disable(mtk_crtc->mutex);
> > for (i = 0; i < mtk_crtc->ddp_comp_nr - 1; i++) {
> > + mtk_ddp_comp_bgclr_in_off(mtk_crtc->ddp_comp[i]);
> > mtk_ddp_remove_comp_from_path(mtk_crtc->config_regs,
> > mtk_crtc->mmsys_reg_data,
> > mtk_crtc->ddp_comp[i]->id,
> > @@ -327,6 +346,8 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
> > struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
> > struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
> > unsigned int i;
> > + unsigned int comp_layer_nr = mtk_ddp_comp_layer_nr(comp);
> > + unsigned int local_layer;
> >
> > /*
> > * TODO: instead of updating the registers here, we should prepare
> > @@ -349,7 +370,14 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
> > plane_state = to_mtk_plane_state(plane->state);
> >
> > if (plane_state->pending.config) {
> > - mtk_ddp_comp_layer_config(comp, i, plane_state);
> > + if (i >= comp_layer_nr) {
> > + comp = mtk_crtc->ddp_comp[1];
> > + local_layer = i - comp_layer_nr;
> > + } else
> > + local_layer = i;
> > +
> > + mtk_ddp_comp_layer_config(comp, local_layer,
> > + plane_state);
> > plane_state->pending.config = false;
> > }
> > }
> > @@ -572,6 +600,12 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
> > }
> >
> > mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
> > + if (mtk_crtc->ddp_comp_nr > 1) {
> > + struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[1];
> > +
> > + if (comp->funcs->bgclr_in_on)
> > + mtk_crtc->layer_nr += mtk_ddp_comp_layer_nr(comp);
> > + }
> > mtk_crtc->planes = devm_kcalloc(dev, mtk_crtc->layer_nr,
> > sizeof(struct drm_plane),
> > GFP_KERNEL);
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
