Hi, Yongqiang:
On Fri, 2019-08-30 at 13:27 +0800, CK Hu wrote:
> Hi, Yongqiang:
>
> On Thu, 2019-08-29 at 22:50 +0800, yongqiang....@mediatek.com wrote:
> > From: Yongqiang Niu <yongqiang....@mediatek.com>
> >
> > This patch add mmsys private data for ddp path config
> > all these register offset and value will be different in future SOC
> > add these define into mmsys private data
> > u32 ovl0_mout_en;
> > u32 rdma1_sout_sel_in;
> > u32 rdma1_sout_dsi0;
> > u32 dpi0_sel_in;
> > u32 dpi0_sel_in_rdma1;
> > u32 dsi0_sel_in;
> > u32 dsi0_sel_in_rdma1;
> >
> > Signed-off-by: Yongqiang Niu <yongqiang....@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 4 ++
> > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 86
> > +++++++++++++++++++++++----------
> > drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 5 ++
> > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 3 ++
> > drivers/gpu/drm/mediatek/mtk_drm_drv.h | 3 ++
> > 5 files changed, 76 insertions(+), 25 deletions(-)
> >
>
> [snip]
>
> >
> > void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
> > + const struct mtk_mmsys_reg_data *reg_data,
> > enum mtk_ddp_comp_id cur,
> > enum mtk_ddp_comp_id next)
> > {
> > unsigned int addr, value, reg;
> >
> > - value = mtk_ddp_mout_en(cur, next, &addr);
> > + value = mtk_ddp_mout_en(reg_data, cur, next, &addr);
> > if (value) {
> > reg = readl_relaxed(config_regs + addr) | value;
> > writel_relaxed(reg, config_regs + addr);
> > }
> >
> > - mtk_ddp_sout_sel(config_regs, cur, next);
> > + value = mtk_ddp_sout_sel(reg_data, cur, next, &addr);
> > + if (value)
> > + writel_relaxed(value, config_regs + addr);
>
> I think the register could be written inside mtk_ddp_sout_sel(), why do
> you move out of that function?
OK, after review other patch, I understand what you do here.
You want to align the method of mtk_ddp_mout_en(), mtk_ddp_sout_sel(),
and mtk_ddp_sel_in(). so modification in these three function would be
the same style. So I think this alignment should be an independent patch
before this patch.
Regards,
CK
>
> Regards,
> CK
>
> >
> > - value = mtk_ddp_sel_in(cur, next, &addr);
> > + value = mtk_ddp_sel_in(reg_data, cur, next, &addr);
> > if (value) {
> > reg = readl_relaxed(config_regs + addr) | value;
> > writel_relaxed(reg, config_regs + addr);
> > @@ -420,18 +455,19 @@ void mtk_ddp_add_comp_to_path(void __iomem
> > *config_regs,
> > }
> >
> >
> >
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
