Hi, Stu:
On Wed, 2018-06-13 at 15:56 +0800, Stu Hsieh wrote:
> Hi, CK:
>
> On Wed, 2018-06-13 at 14:13 +0800, CK Hu wrote:
> > Hi, Stu:
> >
> > On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > > This patch add the connection from RDMA1 to DPI1
> > >
> > > Signed-off-by: Stu Hsieh <stu.hs...@mediatek.com>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> > > 1 file changed, 8 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > index fed1b5704355..4abd5dabeccf 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > @@ -85,7 +85,9 @@
> > > #define RDMA0_MOUT_DSI2 0x4
> > > #define RDMA0_MOUT_DSI3 0x5
> > > #define RDMA1_MOUT_DPI0 0x2
> > > +#define RDMA1_MOUT_DPI1 0x3
> >
> > Usually, each bit of a mout register represent a output enable. Is this
> > value 0x3 a correct value?
> >
> > Regards,
> > CK
> >
> In HW CONFIG SPEC show as following
>
> Bit(s) Name Description
> 2:0 DISP_PATH1_SOUT_SEL_IN 0 : Output to DSI0
> 1: Ooutput to DSI1
> 2: Ooutput to DPI
> 3: Ooutput to DPI1
> 4: Ooutput to DSI2
> 5: Ooutput to DSI3
> 6 : reserved
> 7: Ooutput to DISP_UFOE
>
> So, 0x3 is correct value
It looks like that RDMA1 output is also SOUT, use the naming SOUT would
be better.
Regards,
CK
>
> Regard,
> Stu
>
>
> > > #define DPI0_SEL_IN_RDMA1 0x1
> > > +#define DPI1_SEL_IN_RDMA1 (0x1 << 8)
> > > #define COLOR1_SEL_IN_OVL1 0x1
> > >
> > > #define OVL_MOUT_EN_RDMA 0x1
> > > @@ -171,6 +173,9 @@ static unsigned int mtk_ddp_mout_en(enum
> > > mtk_ddp_comp_id cur,
> > > } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > > *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > > value = RDMA1_MOUT_DPI0;
> > > + } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > > + *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > > + value = RDMA1_MOUT_DPI1;
> > > } else {
> > > value = 0;
> > > }
> > > @@ -190,6 +195,9 @@ static unsigned int mtk_ddp_sel_in(enum
> > > mtk_ddp_comp_id cur,
> > > } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > > *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > value = DPI0_SEL_IN_RDMA1;
> > > + } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > > + *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > + value = DPI1_SEL_IN_RDMA1;
> > > } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> > > *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> > > value = COLOR1_SEL_IN_OVL1;
> >
> >
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
