Hi, Stu:
On Wed, 2018-06-13 at 14:44 +0800, CK Hu wrote:
> Hi, Stu:
>
> On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > This patch add the connection from RDMA1 to DSI1
> >
> > Signed-off-by: Stu Hsieh <stu.hs...@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index 4abd5dabeccf..7e4ad5580cf6 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -28,6 +28,7 @@
> > #define DISP_REG_CONFIG_DISP_UFOE_MOUT_EN 0x050
> > #define DISP_REG_CONFIG_DISP_COLOR0_SEL_IN 0x084
> > #define DISP_REG_CONFIG_DISP_COLOR1_SEL_IN 0x088
> > +#define DISP_REG_CONFIG_DSIO_SEL_IN 0x0a8
> > #define DISP_REG_CONFIG_DPI_SEL_IN 0x0ac
> > #define DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN 0x0c4
> > #define DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN 0x0c8
> > @@ -84,10 +85,12 @@
> > #define RDMA0_MOUT_DPI0 0x2
> > #define RDMA0_MOUT_DSI2 0x4
> > #define RDMA0_MOUT_DSI3 0x5
> > +#define RDMA1_MOUT_DSI1 0x1
> > #define RDMA1_MOUT_DPI0 0x2
> > #define RDMA1_MOUT_DPI1 0x3
> > #define DPI0_SEL_IN_RDMA1 0x1
> > #define DPI1_SEL_IN_RDMA1 (0x1 << 8)
> > +#define DSI1_SEL_IN_RDMA1 0x1
> > #define COLOR1_SEL_IN_OVL1 0x1
> >
> > #define OVL_MOUT_EN_RDMA 0x1
> > @@ -170,6 +173,9 @@ static unsigned int mtk_ddp_mout_en(enum
> > mtk_ddp_comp_id cur,
> > } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI3) {
> > *addr = DISP_REG_CONFIG_DISP_RDMA0_MOUT_EN;
> > value = RDMA0_MOUT_DSI3;
> > + } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
> > + *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > + value = RDMA1_MOUT_DSI1;
> > } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > value = RDMA1_MOUT_DPI0;
> > @@ -198,6 +204,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id
> > cur,
> > } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > value = DPI1_SEL_IN_RDMA1;
> > + } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
> > + *addr = DISP_REG_CONFIG_DSIO_SEL_IN;
>
> Does data sheet use the naming 'DSI0'? You use this register to select
> DSI1 input.
This is DSIO not DSI0, so it's OK for me.
Reviewed-by: CK Hu <ck.hu at mediatek.com>
>
> Regards,
> CK
>
> > + value = DSI1_SEL_IN_RDMA1;
> > } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> > *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> > value = COLOR1_SEL_IN_OVL1;
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
