On Fri, Jun 17, 2016 at 01:03:47PM +0100, Jon Hunter wrote: > Add the DPAUX pinctrl states for the DPAUX nodes defining all three > possible states of "aux", "i2c" and "off". Also add the 'i2c-bus' > node for the DPAUX nodes so that the I2C driver core does not attempt > to parse the pinctrl state nodes. > > Populate the nodes for the pinctrl clients of the DPAUX pin controller. > There are two clients for each DPAUX instance, namely the SOR and one of > the I2C adapters. The SOR clients may used the DPAUX pins in either AUX > or I2C modes and so for these devices we don't define any of the generic > pinctrl states (default, idle, etc) because the SOR driver will directly > set the state needed. For I2C clients only the I2C mode is used and so > we can simplify matters by using the generic pinctrl states for default > and idle. > > Signed-off-by: Jon Hunter <jonathanh at nvidia.com> > --- > arch/arm64/boot/dts/nvidia/tegra210.dtsi | 48 > ++++++++++++++++++++++++++++++++ > 1 file changed, 48 insertions(+)
Looks good to me. Thanks for driving this to conclusion. Thierry -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20160617/e75f2a2b/attachment.sig>
