On Fri, Jun 17, 2016 at 01:03:45PM +0100, Jon Hunter wrote:
> Add node for SOR power-domain for Tegra210 and populate the SOR
> power-domain phandle for SOR and DPAUX nodes that are dependent
> on this power-domain.
>
> Please note that although neither the SOR or DPAUX drivers currently
> support runtime power-management, by populating the power-domain node
> the SOR power-domain will be turned on before probing SOR or DPAUX
> devices and kept on while the devices are bound.
>
> Signed-off-by: Jon Hunter <jonathanh at nvidia.com>
> ---
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index ebf44f4059f8..94f780b43037 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -34,6 +34,7 @@
> clock-names = "dpaux", "parent";
> resets = <&tegra_car 207>;
> reset-names = "dpaux";
> + power-domains = <&pd_sor>;
> status = "disabled";
> };
>
> @@ -154,6 +155,7 @@
> clock-names = "sor", "parent", "dp", "safe";
> resets = <&tegra_car 182>;
> reset-names = "sor";
> + power-domains = <&pd_sor>;
> status = "disabled";
> };
>
> @@ -168,6 +170,7 @@
> clock-names = "sor", "parent", "dp", "safe";
> resets = <&tegra_car 183>;
> reset-names = "sor";
> + power-domains = <&pd_sor>;
> status = "disabled";
> };
>
> @@ -180,6 +183,7 @@
> clock-names = "dpaux", "parent";
> resets = <&tegra_car 181>;
> reset-names = "dpaux";
> + power-domains = <&pd_sor>;
> status = "disabled";
> };
>
> @@ -592,6 +596,20 @@
> resets = <&tegra_car 198>;
> #power-domain-cells = <0>;
> };
> +
> + pd_sor: sor {
> + clocks = <&tegra_car TEGRA210_CLK_SOR0>,
> + <&tegra_car TEGRA210_CLK_DSIA>,
> + <&tegra_car TEGRA210_CLK_DSIB>,
> + <&tegra_car TEGRA210_CLK_MIPI_CAL>,
Does this mean that all of these clocks will be running while the SOR
partition is enabled? Seems like a waste because we rarely need MIPI_CAL
and DSIA and DSIB are completely unused on boards that for example have
only an HDMI output.
I vaguely remember the power domain driver only making sure these are
enabled during the partition power transitions, so perhaps my concerns
aren't justified?
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL:
<https://lists.freedesktop.org/archives/dri-devel/attachments/20160617/39fcb041/attachment.sig>
