Hi Rob,

On 06/23/2016 07:43 PM, Archit Taneja wrote:
> Remove the power-domain property from the DSI, HDMI and eDP dt-binding
> docs. The power domain only needs to be specified in the parent MDSS
> device node (that too only for SoCs which contain MDSS).

Can I get an Ack on this?

Thanks,
Archit

>
> Signed-off-by: Archit Taneja <architt at codeaurora.org>
> ---
>   Documentation/devicetree/bindings/display/msm/dsi.txt  | 3 ---
>   Documentation/devicetree/bindings/display/msm/edp.txt  | 2 --
>   Documentation/devicetree/bindings/display/msm/hdmi.txt | 4 ----
>   3 files changed, 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt 
> b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index e6933a8..c1ef181 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -8,7 +8,6 @@ Required properties:
>   - reg-names: The names of register regions. The following regions are 
> required:
>     * "dsi_ctrl"
>   - interrupts: The interrupt signal from the DSI block.
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
>   - clocks: Phandles to device clocks.
>   - clock-names: the following clocks are required:
>     * "mdp_core_clk"
> @@ -94,7 +93,6 @@ Required properties:
>     * "dsi_phy_regulator"
>   - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, 
> creating
>     2 clocks: A byte clock (index 0), and a pixel clock (index 1).
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
>   - clocks: Phandles to device clocks. See [1] for details on clock bindings.
>   - clock-names: the following clocks are required:
>     * "iface_clk"
> @@ -116,7 +114,6 @@ Example:
>               interrupts = <4 0>;
>               reg-names = "dsi_ctrl";
>               reg = <0xfd922800 0x200>;
> -             power-domains = <&mmcc MDSS_GDSC>;
>               clock-names =
>                       "bus_clk",
>                       "byte_clk",
> diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt 
> b/Documentation/devicetree/bindings/display/msm/edp.txt
> index 3a20f6e..e712dfa 100644
> --- a/Documentation/devicetree/bindings/display/msm/edp.txt
> +++ b/Documentation/devicetree/bindings/display/msm/edp.txt
> @@ -8,7 +8,6 @@ Required properties:
>     * "edp"
>     * "pll_base"
>   - interrupts: The interrupt signal from the eDP block.
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
>   - clocks: device clocks
>     See Documentation/devicetree/bindings/clocks/clock-bindings.txt for 
> details.
>   - clock-names: the following clocks are required:
> @@ -39,7 +38,6 @@ Example:
>                               <0xfd923a00 0xd4>;
>                       interrupt-parent = <&mdss_mdp>;
>                       interrupts = <12 0>;
> -                     power-domains = <&mmcc MDSS_GDSC>;
>                       clock-names =
>                               "core_clk",
>                               "pixel_clk",
> diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt 
> b/Documentation/devicetree/bindings/display/msm/hdmi.txt
> index b63f614..ce84459 100644
> --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
> @@ -11,7 +11,6 @@ Required properties:
>   - reg: Physical base address and length of the controller's registers
>   - reg-names: "core_physical"
>   - interrupts: The interrupt signal from the hdmi block.
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
>   - clocks: device clocks
>     See ../clocks/clock-bindings.txt for details.
>   - qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
> @@ -48,7 +47,6 @@ Required properties:
>       * "hdmi_tx_l1"
>       * "hdmi_tx_l3"
>       * "hdmi_tx_l4"
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
>   - clocks: device clocks
>     See Documentation/devicetree/bindings/clocks/clock-bindings.txt for 
> details.
>   - core-vdda-supply: phandle to vdda regulator device node
> @@ -63,7 +61,6 @@ Example:
>               reg-names = "core_physical";
>               reg = <0x04a00000 0x2f0>;
>               interrupts = <GIC_SPI 79 0>;
> -             power-domains = <&mmcc MDSS_GDSC>;
>               clock-names =
>                   "core_clk",
>                   "master_iface_clk",
> @@ -92,7 +89,6 @@ Example:
>               reg = <0x4a00400 0x60>,
>                     <0x4a00500 0x100>;
>               #phy-cells = <0>;
> -             power-domains = <&mmcc MDSS_GDSC>;
>               clock-names = "slave_iface_clk";
>               clocks = <&mmcc HDMI_S_AHB_CLK>;
>               core-vdda-supply = <&pm8921_hdmi_mvs>;
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Reply via email to