https://bugs.freedesktop.org/show_bug.cgi?id=82201
--- Comment #35 from Kai <kai at dev.carbon-project.org> --- (In reply to Christian K?nig from comment #34) > (In reply to Kai from comment #33) > > And I have non-reclocking GPU again. > > Is there any data I can provide, that would help you tracking down, what > > Windows is setting, that is preventing proper initialisation of the card for > > Linux? > > Well that could actually be perfectly normal behavior. For some hardware > blocks you can upload the firmware only once after a bootup. > > So what could happen is that the windows driver loads one version and the > linux driver needs a different one. The same problems applies the other way > around as well. I think I need to rephrase the description: the system was powered off for ten to twelve hours after I had Windows running, and then on the next boot (into Linux), I didn't get a reclocking GPU. I didn't reboot the PC directly into Linux. (Though I didn't disconnect power, so some parts of the motherboard might stay powered.) -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20141012/57349f3c/attachment.html>
