Le 12/12/2018 à 13:58, Dr. Nikolaus Klepp a écrit :
Am Dienstag, 11. Dezember 2018 schrieb Gonzalo Pérez de Olaguer Córdoba:
Hi Michael K.
El Fri, 7 Dec 2018 12:45:11 +0100
"Michael K." <mich...@cacn.de> escribió:
After a Dev1 Setup on a Laptop (whit eth0), i have to wait a long time
for the eth0 on "cold boot".
I "cold boot" my Laptop
I look to the "Boot Messages"
I see the following Msg:
Configuring Network Interfaces ifup: Waiting for Lock on
/run/network/ifstat.eth0
After 2 or 3 minutes to wait, the Laptop boot up,
Just in case this could help, I've been having this same *symptom*
on KVM virtual machines running ascii.
My situation was eth0 being configured through DHCP and using the
dhcp client from the isc-dhcp-client package, which sends (maybe buggy)
DHCPDECLINE packets.
My workaround was to replace isc-dhcp-client with pump.
If you want more details, tell me and I will continue writing.
Bye,
Salo.
Now this is a neet tick! It also solves the issue that booting hangs on the
said message when no network cable is attached to eth0.
Nik
Is it as simple as apt-get remove isc-dhcp-client; apt-get install
pump ?
Didier
_______________________________________________
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
