Am Dienstag, 11. Dezember 2018 schrieb Gonzalo Pérez de Olaguer Córdoba: > Hi Michael K. > > El Fri, 7 Dec 2018 12:45:11 +0100 > "Michael K." <mich...@cacn.de> escribió: > > > After a Dev1 Setup on a Laptop (whit eth0), i have to wait a long time > > for the eth0 on "cold boot". > > > > I "cold boot" my Laptop > > I look to the "Boot Messages" > > I see the following Msg: > > > > Configuring Network Interfaces ifup: Waiting for Lock on > > /run/network/ifstat.eth0 > > > > After 2 or 3 minutes to wait, the Laptop boot up, > > Just in case this could help, I've been having this same *symptom* > on KVM virtual machines running ascii. > > My situation was eth0 being configured through DHCP and using the > dhcp client from the isc-dhcp-client package, which sends (maybe buggy) > DHCPDECLINE packets. > > My workaround was to replace isc-dhcp-client with pump. > > If you want more details, tell me and I will continue writing. > > Bye, > Salo. >
Now this is a neet tick! It also solves the issue that booting hangs on the said message when no network cable is attached to eth0. Nik -- Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ... _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
