I've still not got things working.
# iwconfig shows my USB network dongle to have the value: wlx2824ff1a1794
So in /etc/network/interfaces I have:
auto lo
iface lo inet loopback
allow hotplug eth0
iface inet eth0 dhcp
auto wlx2824ff1a1794
iface wlx2824ff1a1794 inet dhcp
wpa-driver nl80211
wpa-conf /etc/wpa_supplicant.conf
The file /etc/wpa_supplicant.conf has:
network={
ssid="ATT680"
#psk="..."
psk=...
}
# ifconfig returns:
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet = 192.168.1.203 ...
...
wlx28924ff1a17894 flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet = 192.168.1.203 ...
...
I'm surprised to see both interfaces assigned an IP address even though
I'm currently using ethernet wired.
One problem is that no mail gets out. Exim main log says: "lookup failed
for all hosts in smarthost router: host_find_failed=ignore
hosts_all_ignore=defer. No IP address found for host... Is this normal,
or does it point to trouble?
Another problem is that I can't switch from eth0 to wlx2894ff1a1794. If
I do # ifconfig eth0 down and # ifconfig wlx2824ff1a up, I see in
# inconfig that eth0 has no stanza and that the wlx2824ffla1794
interface is not RUNNING. Can't ping or browse the web (failure in name
resolution).
If I restart the network, eth0 is RUNNING, but gets a different address:
168.192.1.212. wlx2824ff1a1974 is also RUNNING, but with old address.
I now have no internet access (ping times out), and to recover it I
have to bring wlx2824ff1a1794 down.
Haines Brown
_______________________________________________
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
