I m copying my entire Devuan system to new  partitions on the same computer. 
but I can't get the copy system to boot.

I plan to upgrade the copy to ascii, keeping the old system in  dual-boot 
scenario just in case  I'm not expecting problems, but I've had them on Debian 
upgrades years ago, and they sometimes arise from causes that have nothing to 
do with the quality of the old and new systems.

The messge I get is:

vmlinuz-3.16.0-4-686-pae not found
you need to load the kernel first

But vmlinuz-3.16.0-4-686-pae *is* the kernel.  I don't know how to load the 
ernel before it can find the kernel.

***

Here's how I got to this point.

/boot and /ascii/boot (I'll use the names these partitions have on the old 
system) are partitions of their own on a DOS-style partitioned disk, as is swap.

/dev/sda6 on /boot type ext4 (rw,relatime,data=ordered)
/dev/sda7 on /ascii/boot type ext4 (rw,relatime,data=ordered

oot@notlookedfor:/home/hendrik# swapon
NAME      TYPE      SIZE USED PRIO
/dev/sda5 partition 4.7G   0B   -1
root@notlookedfor:/home/hendrik# 

The other partitions are within LVM.

/dev/mapper/jessie-devuan--home on /home type ext4 (rw,relatime,data=ordered)
/dev/mapper/jessie-tmp on /tmp type ext4 (rw,relatime,data=ordered)
/dev/sda6 on /boot type ext4 (rw,relatime,data=ordered)
/dev/mapper/jessie-devuan--usr on /usr type ext4 (rw,relatime,data=ordered)
/dev/mapper/jessie-devuan--var on /var type ext4 (rw,relatime,data=ordered)
/dev/sda7 on /ascii/boot type ext4 (rw,relatime,data=ordered)
/dev/mapper/jessie-ascii--root on /ascii/root type ext4 
(rw,relatime,errors=remount-ro,data=ordered)
/dev/mapper/jessie-ascii--usr on /ascii/usr type ext4 (rw,relatime,data=ordered)
/dev/mapper/jessie-ascii--var on /ascii/var type ext4 (rw,relatime,data=ordered)

The partitions  with devuan in their mapper names belong to the jessie system;
those with ascii in theor names are intended for the future ascii system, and  
currently are a copy of the ones for jessie, exceot of course that 
/jessie/root/etc/fstab (ascii's fstab) hace had the partition names swapped 
around, so that  for example /boot there is ascii's /boot instead of jessie's, 
and the old systems partitions are known as /jessie/boot, etc.

Just before today's tests, I used rsync to synchronise the two systems, and 
then copied the modufied fstab to the ascii system, just to make sure it was 
the new one instead of the rsync'd one.

Then reboot.  It offered me a choice of systems to boot; I chose the new one, 
and got the error message I presented above.

vmlinuz-3.16.0-4-686-pae not found
you need to load the kernel first

So ... where do I start to look for the problem.  How far along in the boot 
process is the system component that produces the above message?  Are there any 
usable diagnostic tools at this point in the boot process?

Yes, that file *is* present in /ascii/boot.

root@notlookedfor:/home/hendrik# ls /ascii/boot
config-3.16.0-4-686-pae      lost+found
grub                         System.map-3.16.0-4-686-pae
initrd.img-3.16.0-4-686-pae  vmlinuz-3.16.0-4-686-pae
root@notlookedfor:/home/hendrik# 

-- hendrik

_______________________________________________
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng

Reply via email to