Simon Walter <si...@gikaku.com> writes: [...]
> I am adding containers (LXC) and > virtual network to the box, I think I will add an tap and bridge > interface to an /etc/network/interface.d/ file. If I use something > like: > > auto br0 > iface br0 inet static > pre-up ip tuntap add dev tap0 mode tap > pre-up ip link set tap0 up > post-down ip link set tap0 down > post-down ip tuntap del dev tap0 mode tap > bridge_ports tap0 > address 10.1.1.1 > netmask 255.255.255.0 > broadcast 10.1.1.255 > > And make sure there is the source /etc/network/interface.d/* line in > the interfaces file. Then route with iptables between the a physical > NIC (eth0 for example) and the virtual NIC (tap0) and have all the > containers connected to br0. > > Are there any glaring problems with this setup? This will create a bridge with one virtual network interface bridged to a character device an application could use to talk 'ethernet' to the network stack. That's certainly not inherently related to/ useful for anything-lxc. _______________________________________________ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
