Hi. Thank You for the reply. I went through vswitch.ovsschema. Do i need tp make any change in vswitch.ovsschema?
If YES then what change do i need to make? its a lengthy file. Can You kindly let me know the exact changes i need to make? Thank You & Regards Sanghamitra De On Sat, Mar 28, 2015 at 10:26 PM, Ping Chun Huang <pichu...@cs.nctu.edu.tw> wrote: > hi, > > Does any ovsdb schema in > "/users/peertest/openvswitch-2.3.0/vswitchd/vswitch.ovsschema"? I think you > loss that. > > if you want to find that, try to "locate vswitch.ovsschema" > > > pichuang, Ping-Chun Huang 黃秉鈞 > > > Wireless Internet Laboratory > Computer Center, Department of Computer Science > National Chiao Tung University > > 2015-03-28 15:31 GMT+08:00 Sanghamitra De <sanghamitra...@gmail.com>: > >> Hi, >> Thanks for the reply. >> >> >> I made the installation by the following commands: >> >> sudo mkdir /work >> sudo chown `whoami` /work >> cd /work >> >> ## Download, configure, compile, and install Open vSwitch. >> wget http://openvswitch.org/releases/openvswitch-2.3.0.tar.gz >> tar zxf openvswitch-2.3.0.tar.gz >> cd openvswitch-2.3.0 >> ./configure >> make >> sudo make install >> >> sudo /sbin/modprobe openvswitch >> >> >> >> >> >> /sbin/lsmod >> >> >> >> ## Clean up. >> cd / >> sudo rm -rf /work >> >> ## Logout, used Emulab web interface to make a disk *image*. Then loaded >> that image to the nodes where i wanted OVS to be loaded. >> >> Then the following commands were given: >> >> >> #ovsdb-tool create /usr/local/etc/openvswitch/conf.db >> /users/peertest/openvswitch-2.3.0/vswitchd/vswitch.ovsschema >> >> # ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \ >> >> --remote=db:Open_vSwitch,Open_vSwitch,manager_options \ >> >> --pidfile --detach >> >> >> >> # ovs-vsctl --no-wait init >> >> sudo ovs-vswitchd --pidfile --detach --log-file >> >> >> Then logged into a node which has OVS installed in the above way and gave: >> >> sudo ifconfig eth1 0 >> >> sudo ifconfig eth2 0 >> >> >> #ovs-vsctl add-br br-int >> >> sudo ovs-vsctl add-br OVSbr1 >> >> sudo ovs-vsctl add-br OVSbr2 >> >> >> Last 3 lines give error so to see the log file: >> >> cat /var/log/openvswitch/ovs-vswitchd.log >> >> >> >> Am I missing out something vital in the command? If so then Please let me >> know what will be the correct sequence of commands. >> >> I'm trying to do a couple of experiments by using a few nodes in Emulab. Of >> these 3 nodes will act as switches- so i am using the *image *(mentioned >> earlier) to install OVS in them. The nodes will talk to each other and >> switches will do the routing. And here i am stuck with the OVS install. >> Next i got to write the controller.. Can you help me get the installation >> right? >> >> >> >> Thanks & Regards >> >> Sanghamitra De >> >> >> >> >> On Fri, Mar 27, 2015 at 10:58 PM, Kris <13520814...@126.com> wrote: >> >>> How did you install the ovs? It seems your installation is not correct. >>> >>> >>> KRIS >>> >>> >>> On 2015-03-28 01:02 , Sanghamitra De <sanghamitra...@gmail.com> Wrote: >>> >>> Hi, >>> >>> the log file screenshot is attached. >>> >>> the following errors continue on trying the following lines: >>> >>> >>> #ovs-vsctl add-br br-int >>> ovs-vsctl: Error detected while setting up 'br-int'. See ovs-vswitchd >>> log for details >>> >>> # ovs-vsctl add-br br0 >>> ovs-vsctl: Error detected while setting up 'br0'. See ovs-vswitchd log >>> for details >>> >>> # ovs-vsctl add-br br1 >>> ovs-vsctl: Error detected while setting up 'br1'. See ovs-vswitchd log >>> for details >>> >>> why is there problem while trying to create br-int or br0, br1 for that >>> matter? >>> >>> >>> Thanks & Regards >>> Sanghamitra De >>> >>> >>> >>> 来自网易手机号码邮箱了解更多 <http://shouji.163.com> >>> >> >> >> _______________________________________________ >> discuss mailing list >> discuss@openvswitch.org >> http://openvswitch.org/mailman/listinfo/discuss >> >> >
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
