hi, Does any ovsdb schema in "/users/peertest/openvswitch-2.3.0/vswitchd/vswitch.ovsschema"? I think you loss that.
if you want to find that, try to "locate vswitch.ovsschema" pichuang, Ping-Chun Huang �S秉�x Wireless Internet Laboratory Computer Center, Department of Computer Science National Chiao Tung University 2015-03-28 15:31 GMT+08:00 Sanghamitra De <sanghamitra...@gmail.com>: > Hi, > Thanks for the reply. > > > I made the installation by the following commands: > > sudo mkdir /work > sudo chown `whoami` /work > cd /work > > ## Download, configure, compile, and install Open vSwitch. > wget http://openvswitch.org/releases/openvswitch-2.3.0.tar.gz > tar zxf openvswitch-2.3.0.tar.gz > cd openvswitch-2.3.0 > ./configure > make > sudo make install > > sudo /sbin/modprobe openvswitch > > > > > > /sbin/lsmod > > > > ## Clean up. > cd / > sudo rm -rf /work > > ## Logout, used Emulab web interface to make a disk *image*. Then loaded > that image to the nodes where i wanted OVS to be loaded. > > Then the following commands were given: > > > #ovsdb-tool create /usr/local/etc/openvswitch/conf.db > /users/peertest/openvswitch-2.3.0/vswitchd/vswitch.ovsschema > > # ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \ > > --remote=db:Open_vSwitch,Open_vSwitch,manager_options \ > > --pidfile --detach > > > > # ovs-vsctl --no-wait init > > sudo ovs-vswitchd --pidfile --detach --log-file > > > Then logged into a node which has OVS installed in the above way and gave: > > sudo ifconfig eth1 0 > > sudo ifconfig eth2 0 > > > #ovs-vsctl add-br br-int > > sudo ovs-vsctl add-br OVSbr1 > > sudo ovs-vsctl add-br OVSbr2 > > > Last 3 lines give error so to see the log file: > > cat /var/log/openvswitch/ovs-vswitchd.log > > > > Am I missing out something vital in the command? If so then Please let me > know what will be the correct sequence of commands. > > I'm trying to do a couple of experiments by using a few nodes in Emulab. Of > these 3 nodes will act as switches- so i am using the *image *(mentioned > earlier) to install OVS in them. The nodes will talk to each other and > switches will do the routing. And here i am stuck with the OVS install. Next > i got to write the controller.. Can you help me get the installation right? > > > > Thanks & Regards > > Sanghamitra De > > > > > On Fri, Mar 27, 2015 at 10:58 PM, Kris <13520814...@126.com> wrote: > >> How did you install the ovs? It seems your installation is not correct. >> >> >> KRIS >> >> >> On 2015-03-28 01:02 , Sanghamitra De <sanghamitra...@gmail.com> Wrote: >> >> Hi, >> >> the log file screenshot is attached. >> >> the following errors continue on trying the following lines: >> >> >> #ovs-vsctl add-br br-int >> ovs-vsctl: Error detected while setting up 'br-int'. See ovs-vswitchd log >> for details >> >> # ovs-vsctl add-br br0 >> ovs-vsctl: Error detected while setting up 'br0'. See ovs-vswitchd log >> for details >> >> # ovs-vsctl add-br br1 >> ovs-vsctl: Error detected while setting up 'br1'. See ovs-vswitchd log >> for details >> >> why is there problem while trying to create br-int or br0, br1 for that >> matter? >> >> >> Thanks & Regards >> Sanghamitra De >> >> >> >> 来自网易手机号码邮箱了解更多 <http://shouji.163.com> >> > > > _______________________________________________ > discuss mailing list > discuss@openvswitch.org > http://openvswitch.org/mailman/listinfo/discuss > >
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
