I've restarted the daemon. I saw the logs being stored elsewhere, with the correct version. The queue is inserted and how many packets passed through it.
However the command 'sudo ovs-ofctl queue-get-config s1 s1-eth2 ' gives me the output 'queue 0: However as you may see the actions I did in mininet since i started the topology: http://pastebin.com/RwvV3K10 After I've defined the rates I created an enqueue action when flows went from s1->s2 and s2->s1. After that I did iperf and bandwidth was too low (around 500kb) and iperf took like 1 minute. After that I just used the action output:<port> in order to have connectivity and then I had around 10mb. Note that when link is not specified in mininet links are around 10Gpbs. FYI I added the queues in another tab, but essencially the command was this one: "sudo ovs-vsctl -- set port s1-eth2 qos=@newqos -- --id=@newqos create qos type=linux-htb other-config:max-rate=10000000 queues:0=@newQ -- --id=@newQ create queue other-config:min-rate=150000 other-config:max-rate=250000". I added the same configuration to s1 and s2 switches on port the ports that connect those switches. Is that normal behaviour ? Regards, Nuno B. ________________________________________ De: Ben Pfaff <b...@nicira.com> Enviado: 6 de março de 2015 21:05 Para: Rui Braz Cc: mininet-disc...@lists.stanford.edu; discuss@openvswitch.org Assunto: Re: [ovs-discuss] Queue added but not shown using ovs-ofctl OK. I don't know how to help without the log. I guess you'll have to figure out what's going on there first. On Fri, Mar 06, 2015 at 08:47:02PM +0000, Rui Braz wrote: > I don't need to start it, I just launch the topology. I think mininet vm > already has scripts to launch it at boot. However after I start the VM i > checked the processes that are running and i got this: > http://pastebin.com/13bYMN3K > > Logs seem to be being saved in the same place according to this excert of the > process ovs-vswitchd '--log-file=/usr/var/log/openvswitch/ovs-vswitchd.log'. > > However as i mentioned in previous emails, the last info I have on that is > about openvswitch 2.0.2 and I have no problem in running mininet with > openvswitch 2.3. > > Regards, > Nuno B. > ________________________________________ > De: Ben Pfaff <b...@nicira.com> > Enviado: 5 de mar?o de 2015 19:15 > Para: Rui Braz > Cc: mininet-disc...@lists.stanford.edu > Assunto: Re: [ovs-discuss] Queue added but not shown using ovs-ofctl > > On Thu, Mar 05, 2015 at 05:20:51PM +0000, Rui Braz wrote: > > I've upgraded the OVS from 2.0.2 to 2.3 using this script: > > http://pastebin.com/3ViQxg7D. Script was on github from mininet if I'm not > > mistaken. > > > > After doing that the logs generated from OVS are not sent to > > /var/log/openvswitch because when I go there and print the log only appears > > to me the log from last version which is 2.0.2 as you may see here: > > http://pastebin.com/Tf4VtAtz > > > > Are the logs being generated elsewhere ? > > When you start ovs-vswitchd, where you do tell it to put the log? > > > Also I'm able to see the queues I've created if I do "sudo ovs-vsctl list > > queue". > > Not relevant. _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
