Hi all, 

 

I understand that might be a question more related to the controller, but at 
this point, i am not sure.

 

So, basically, i have such a configuration:

 

--------                           ---------                                    
          ----------------

|   A  | -eth0--> eth0 -|   B   | -eth4 ----- LAN ------eth4 | Controller |

--------                           ---------                                    
          -----------------


node A and B are 2 ovs-switch.... I can get both A and B to connect to the 
controller, but the controller, in my case OpenDaylight, does not draw a line 
between A and B... meaning it doens't know they are connected together, 
right?.... how can we have both connected?

If i had a br0:1 interface on A with the LAN subnet that is between B and the 
controller, it shows that br0:1 address as a host connected to B for that 
address.

 

Anyone knows why it doesn't see a link between A and B or why it sees br0:1 as 
a host? Does anyone know how the controller determines if 2 nodes are connected 
to each other (in my case I would expect it to see that eth0 in br0 of A is 
connected to eth0 in br0 of B)... maybe by knowing that i could fix that up ...

 

thanks, 

 

sam

 

 

 

 
                                          
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to