Hi,
I'm trying to configure a LISP tunnel between two ovs (each in a different
host), but I found some troubles obtaining the port number once I add a port
type=lisp.
According to the README-lisp, first I add the lisp port without problems (also
the other required ports).
$ ovs-vsctl add-port br0 lisp0 -- set Interface lisp0 type=lisp
options:remote_ip=flow options:key=flow
$ ovs-vsctl show
dc921bc7-88f5-42e8-baeb-b397fe321fa2
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "eth2"
Interface "eth2"
Port "lisp0"
Interface "lisp0"
type: lisp
options: {key=flow, remote_ip=flow}
Port "tap0"
Interface "tap0"
ovs_version: "2.1.2"
Now, I need to identify the port number that is assigned to 'lisp0' to
configure the flows. I used ovs-ofctl show br0 to obtain this information:
$ ovs-ofctl show br0
OFPT_FEATURES_REPLY (xid=0x2): dpid:00001cc1de073834
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST
SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
1(eth2): addr:1c:c1:de:07:38:34
config: 0
state: 0
current: 1GB-FD COPPER AUTO_NEG
advertised: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD AUTO_NEG
supported: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
speed: 1000 Mbps now, 1000 Mbps max
LOCAL(br0): addr:1c:c1:de:07:38:34
config: 0
state: 0
speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY (xid=0x4): frags=normal miss_send_len=0
It shows that eth2 is in port 1 but there is no info regarding lisp0.
I hope anyone can provide me some clues.
Many Thanks.
Regards,
Diego Montero.
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
