Hey Kris, There was a bug in the "add_vsp()" function in "ofproto/ofproto-dpif.c". And the fix is in this patch http://git.openvswitch.org/cgi-bin/gitweb.cgi?p=openvswitch;a=commit;h=deea120099d23fac3f687ec302351e38a21ee353 .
I think this may be the reason for your problem. Kind Regards, Alex Wang On Tue, Jun 4, 2013 at 8:07 AM, Kris zhang <[email protected]> wrote: > Thanks Jesse, I solved this issue through upgrade the NIC driver igb from > 2.1 to 2.4, now it is ok even if use Linux bond as the external port of ovs > bridge. And i will try to use OVS bonding once i have a chance. Also i hope > FAQ can list which NIC driver has vlan problem, and should be upgrade to > which version. > > Thanks, > Kris > > > On Thu, May 30, 2013 at 7:22 AM, Jesse Gross <[email protected]> wrote: > >> Linux bonds don't pass vlan information through to the driver. If you >> use OVS bonding then you shouldn't have this problem. >> >> On Wed, May 29, 2013 at 11:08 AM, Kris zhang <[email protected]> >> wrote: >> > I found the reason, the problem is not caused by vlan splinters, it >> caused >> > by bond0. I don't know why, but if remove the bond0, and ovs-br0 >> directly >> > connect to eth0, the problem disappears. >> > >> > >> > >> > >> > On Mon, May 27, 2013 at 10:10 AM, Kris zhang <[email protected]> >> wrote: >> >> >> >> Hi Jesse, >> >> >> >> Because if i don't use the vlan splinters, the VMs' network traffic >> will >> >> be nearly 0 M/s (but they can ping each other). I read FAQ, it says the >> >> reason maybe the NIC driver or Linux kernel version problems, and it >> also >> >> says the vlan splinters may solve this issue, but they don't said the >> ping >> >> will miss some packets when add a new vlan. is it a bug for vlan >> splinters? >> >> Please see the images in the attachment. >> >> >> >> Thanks, >> >> Kris >> >> >> >> >> >> On Thu, May 23, 2013 at 11:25 PM, Jesse Gross <[email protected]> >> wrote: >> >>> >> >>> It seems that the original issue was that you were using VLANs when >> >>> you shouldn't have. In that case, why are you trying to use VLAN >> >>> splinters? >> >>> >> >>> On Thu, May 23, 2013 at 2:44 AM, Kris zhang <[email protected]> >> wrote: >> >>> > Thanks Jesse, but i still cannot fix my issue. Because if i use vlan >> >>> > splinters, the above issue will be happened, if i don't use vlan >> >>> > splinters, >> >>> > the packets between the VMs are very slow (ping is ok), i use >> ovs-dpctl >> >>> > dump-flows br0, get the following result: >> >>> > >> >>> > >> >>> > >> in_port(1),eth(src=c6:b0:ea:37:29:47,dst=c6:b0:3a:c0:0d:55),eth_type(0x8100),vlan(vid=3000,pcp=0),encap(eth_type(0x0800),ipv4(src=20.1.120.12,dst=20.1.120.13,proto=1,tos=1,ttl=64,frag=no),icmp(type=8,code=0)), >> >>> > packets:101, bytes:10302, used:4.341s, actions=pop_vlan,3 >> >>> > >> >>> > >> in_port(3),eth(src=c6:b0:3a:c0:0d:55,dst=c6:b0:ea:37:29:47),eth_type(0x0800),ipv4(src=20.1.120.13,dst=20.1.120.12,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0)), >> >>> > packets:101, bytes:9898, used:4.341s, >> >>> > actions=push_vlan(vid=3000,pcp=0),1 >> >>> > >> >>> > The port 1 is eth1, and the port 3 is the tap of VM. >> >>> > Does the iptables affect the ovs? If not, i have to upgrade the >> linux >> >>> > kernel, or upgrade NIC driver. >> >>> > >> >>> > Thanks, >> >>> > Kris >> >>> > >> >>> > >> >>> > >> >>> > >> >>> > On Tue, May 21, 2013 at 3:32 AM, Jesse Gross <[email protected]> >> wrote: >> >>> >> >> >>> >> There's an extensive section in the FAQ about vlans that I would >> >>> >> recommend reading. >> >>> >> >> >>> >> On Mon, May 20, 2013 at 8:51 AM, Kris zhang <[email protected]> >> >>> >> wrote: >> >>> >> > No, so you mean it maybe not caused by vlan splinters? >> >>> >> > >> >>> >> > >> >>> >> > On Mon, May 20, 2013 at 11:18 PM, Jesse Gross <[email protected]> >> >>> >> > wrote: >> >>> >> >> >> >>> >> >> On Mon, May 20, 2013 at 4:37 AM, Kris zhang < >> [email protected]> >> >>> >> >> wrote: >> >>> >> >> > Hi guys, >> >>> >> >> > >> >>> >> >> > I use ovs-1.7.1, and i run ovs on a single NIC host (CentOS): >> >>> >> >> > >> >>> >> >> > # ovs-vsctl add-br br0 >> >>> >> >> > # ovs-vsctl add-port br0 eth0 >> >>> >> >> > >> >>> >> >> > Then i setup the eth0 interface's other_config: >> >>> >> >> > enable-vlan-splinters="true". >> >>> >> >> > >> >>> >> >> > Last I ping this host by another PC, and at same time i do >> this: >> >>> >> >> > >> >>> >> >> > # ovs-vsctl add-port taptest br0 tag=100 >> >>> >> >> > >> >>> >> >> > I found there are 4 "Request timed out." happened. That means >> the >> >>> >> >> > host >> >>> >> >> > lost >> >>> >> >> > connect about 4 seconds. >> >>> >> >> > >> >>> >> >> > If i remove the vlan splinters on interface eth0. it won't >> >>> >> >> > happen. >> >>> >> >> > So does anybody know the reason? >> >>> >> >> >> >>> >> >> Is the other machine actually on that VLAN? >> >>> >> > >> >>> >> > >> >>> > >> >>> > >> >> >> >> >> > >> > > > _______________________________________________ > discuss mailing list > [email protected] > http://openvswitch.org/mailman/listinfo/discuss > >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
