Ron, SoapySDR in #include <SoapySDR/Types.hpp> (in gr_soapy/include/gnuradio/soapy/soapy_types.h) is not defined although I interpret the lines of CMakeCache.txt:
//Path to a file. SOAPY_SDR_INCLUDE_DIR:PATH=~/.local/include //Path to a library. SOAPY_SDR_LIBRARY:FILEPATH=~/.local/lib/libSoapySDR.so to imply that the external dependency SoapySDR was found. Later today I will build and install SoapySDR and gnuradio with the default install prefix (/usr/local) as you suggest. Rick On 2023-02-07 18:48, Ron Economos wrote: > You can also try adding: > > -DCMAKE_FIND_DEBUG_MODE=ON > > to your cmake invocation. This will dump where cmake is trying to find > package files. > > If you really get stuck, it may be useful to use a more common install > prefix. Cmake will default to /usr/local and /opt. > > I'm a big fan of using /opt. It's very easy to delete installs in /opt > versus /usr/local. > > Ron > > On 2/7/23 18:20, aard...@aardvarr.ca wrote: >> That looked promising but produced the same result. >> I found this line in the CMakeCache.txt: >> >> //No help, variable specified on the command line. >> CMAKE_PREFIX_PATH:UNINITIALIZED=~/.local >> >> which I don't understand. >> >> I certainly appreciate the suggestions and it encourages me to keep >> plugging away. It will be a learning experience for sure. >> >> Rick >> >> On 2023-02-07 14:27, Ron Economos wrote: >>> This is just a guess, but you could try adding: >>> >>> -DCMAKE_PREFIX_PATH=~/.local >>> >>> to your cmake invocation. >>> >>> Ron >>> >>> On 2/7/23 11:56, aardric wrote: >>>> Ryan, >>>> Here is an excerpt of the CMake output: >>>> -- >>>> -- Configuring gr-soapy support... >>>> -- Dependency SoapySDR_FOUND = 1 >>>> -- Dependency ENABLE_GNURADIO_RUNTIME = ON >>>> -- Enabling gr-soapy support. >>>> -- Override with -DENABLE_GR_SOAPY=ON/OFF >>>> -- SOAPY Version: 0.7.2-unknown >>>> -- No C++ unit tests... skipping >>>> -- >>>> >>>> Rick >>>> >>>> On 2023-02-07 11:12, aardric wrote: >>>>> Hail, >>>>> Your feedback goes beyond my expectations. Before I follow this >>>>> further, here is a summary of my installation attempt as Marcus >>>>> requested. I hope that it is a good balance between detail and clutter. >>>>> >>>>> First to clarify, by 'local' I mean under my home directory (no >>>>> superuser install). The OS is opensuse Leap 15.4. >>>>> The required Type.h and Types.hpp are in the directory: >>>>> > ls ~/.local/include >>>>> gnuradio lime pmt SoapySDR >>>>> >>>>> The sequence of the installation is as follows: >>>>> >>>>> (1) gnuradio 3.10.5.1 was installed in the usual manner from the cloned >>>>> repository. >>>>> gnuradio/build> cmake -DCMAKE_INSTALL_PREFIX=~/.local >>>>> -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=/usr/bin/python3 >>>>> -DBoost_LIBRARY_DIRS=/usr/lib64 -DQWT_LIBRARIES=/usr/lib64/libqwt.so.6 >>>>> -DQWT_INCLUDE_DIRS=/usr/include/qt5/qwt6 -DENABLE_GR_UHD=OFF >>>>> -DZEROMQ_LIBRARIES=/usr/local/lib64/libzmq.so >>>>> -DZEROMQ_INCLUDE_DIRS=/usr/local/include -DENABLE_GR_SOAPY=OFF ../ >>>>> >>>>> Environment variables: >>>>> LD_LIBRARY_PATH="~/.local/lib" >>>>> PYTHONPATH="~/.local/lib64/python3.6/site-packages" >>>>> >>>>> The installation worked as expected. >>>>> >>>>> (2) The distro version of soapySDR (branch 0.8) was NOT installed as per >>>>> the recommendation of >>>>> https://wiki.gnuradio.org/index.php/Soapy#gr-osmosdr%20(Ref:%20https://github.com/pothosware/SoapySDR/wiki/BuildGuide >>>>> >>>>> SoapySDR-soapy-sdr-0.7.2 was built and installed from a downloaded >>>>> archive file. >>>>> >>>>> SoapySDR-soapy-sdr-0.7.2/build> cmake >>>>> -DCMAKE_INSTALL_PREFIX:PATH=~/.local -DENABLE_PYTHON3=OFF >>>>> Executing SoapySDRUtil worked as expected. >>>>> >>>>> (3) LimeSuite 20.10.0 built and installed from downloaded archive file. >>>>> LimeSuite-20.10.0/builddir> cmake -DCMAKE_INSTALL_PREFIX:PATH=~/.local >>>>> -DENABLE_GUI=ON -DENABLE_UTILITIES=ON -DENABLE_SOAPY_LMS7=ON ../ >>>>> >>>>> Executing SoapySDRUtil and LimeUtil found hardware and reported as >>>>> expected. >>>>> >>>>> (4) gnuradio build directory was emptied and CMakeCache.txt deleted. >>>>> gnuradio/build> cmake -DCMAKE_INSTALL_PREFIX=~/.local >>>>> -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=/usr/bin/python3 >>>>> -DBoost_LIBRARY_DIRS=/usr/lib64 -DQWT_LIBRARIES=/usr/lib64/libqwt.so.6 >>>>> -DQWT_INCLUDE_DIRS=/usr/include/qt5/qwt6 -DENABLE_GR_UHD=OFF >>>>> -DZEROMQ_LIBRARIES=/usr/local/lib64/libzmq.so >>>>> -DZEROMQ_INCLUDE_DIRS=/usr/local/include -DENABLE_GR_SOAPY=ON ../ >>>>> >>>>> Configuration by cmake did not show errors but >>>>> gnuradio/build> make -j4 >>>>> results in error on missing <SoapySDR/Types.hpp> as mentioned below. >>>>> More details upon request. >>>>> >>>>> cheers, >>>>> Rick >>>>> >>>>> >>>>> On 2023-02-07 10:48, Ryan Volz wrote: >>>>>> Hi all, >>>>>> >>>>>> GNU Radio's cmake scripts do check for this situation (SoapySDR not >>>>>> found, GR_ENABLE_SOAPY force-enabled) and it should error out when >>>>>> `cmake` is run: >>>>>> >>>>>> https://github.com/gnuradio/gnuradio/blob/main/cmake/Modules/GrComponent.cmake#L71 >>>>>> >>>>>> The full CMake output would be useful to figuring out why that didn't >>>>>> happen. As far as I can tell, CMake should not "find" SoapySDR if its >>>>>> headers are missing, but maybe that's where it is going wrong. >>>>>> >>>>>> Cheers, >>>>>> Ryan >>>>>> >>>>>> On 2/7/23 5:14 AM, Marcus Müller wrote: >>>>>>> Hi Ron, Hi Rick, >>>>>>> >>>>>>> agreed, you probably need that development package. Problem: Without it, >>>>>>> the GNU Radio build infrastructure shouldn't even allow for enabling of >>>>>>> the SoapySDR components. >>>>>>> >>>>>>> So, Rick, could you tell us which operating system/distro this is on, >>>>>>> and how you did that local installation of SoapySDR, precisely? >>>>>>> >>>>>>> Best regards, >>>>>>> Marcus >>>>>>> >>>>>>> On 07.02.23 06:19, Ron Economos wrote: >>>>>>>> You probably need the development package. >>>>>>>> >>>>>>>> sudo apt-get install libsoapysdr-dev >>>>>>>> >>>>>>>> Ron >>>>>>>> >>>>>>>> On 2/6/23 18:37, aardric wrote: >>>>>>>>> I executed the following steps which I think are consistent with >>>>>>>>> documentation on the wiki. >>>>>>>>> >>>>>>>>> (1) local installation of SoapySDR 0.7.2 appears to work. >>>>>>>>> (2) build and local install of gnuradio 3.10.5.1 works as expected >>>>>>>>> with >>>>>>>>> -DENABLE_GR_SOAPY=OFF >>>>>>>>> (3) delete the gnuradio/build folder and run cmake with >>>>>>>>> -DENABLE_GR_SOAPY=ON configures without an obvious problem. >>>>>>>>> (4) however, make fails with: >>>>>>>>> include/gnuradio/soapy/soapy_types.h:15:10: fatal error: >>>>>>>>> SoapySDR/Types.hpp: No such file or directory >>>>>>>>> 15 | #include <SoapySDR/Types.hpp> >>>>>>>>> >>>>>>>>> I'm hoping to get advice on whether the above procedure was reasonable >>>>>>>>> before I (as a non developer) attempts to reverse engineer and >>>>>>>>> debug the >>>>>>>>> above process. I hesitate to raise an issue for something which may be >>>>>>>>> obvious or a problem with my particular installation. >>>>>>>>> >>>>>>>>> Rick >>>>>>>>> >>>>>>>>> >>>>>>>>> >> >
