Hello I am trying to install RFNoC for uhd 3.15. As far as I understand,
this version supports RFNoC. And in order for me to have blocks in
gnuradio, as I understand it, I need to install gr-ettus. But when
installing, I get this error The found UHD version (3.15.0.0-3build2) is
not compatible with the version required (4.0). how can I be in such a
situation?
ср, 18 нояб. 2020 г. в 16:24, Derek Kozel <de...@bitstovolts.com>:
> Hi Ivan,
>
> The TX/RX and RX2 are ports on the same receiver channel. As Julian says
> there are two receivers, A and B. For a receive only application the RX2
> ports are slightly better performing as they have one less switch that
> the signal passes through.
>
> Regards,
> Derek
>
> On 18/11/2020 14:01, Julian Arnold wrote:
> > Ivan,
> >
> > to the best of my knowledge, there should not be any RX1 port.
> > Instead, you should have two (coherent) channels "A" and "B" both
> > allowing you to select one out of two available antenna ports when
> > receiving ("TX/RX" or "RX2").
> >
> > Cheers,
> > Julian
> >
> > On 11/18/20 10:31 AM, Ivan Zahartchuk via USRP-users wrote:
> >>
> >> Another question of interest is which channels are coherent? Rx1 and
> >> RX2 or RX1 and RX / TX?
> >>
> >> вт, 17 нояб. 2020 г. в 01:56, Ivan Iudice <kron...@tiscali.it
> >> <mailto:kron...@tiscali.it>>:
> >>
> >> Right!
> >> Be careful, DOA estimation using only 2 antennas works but it’s not
> >> so accurate.
> >> Enjoy!
> >>
> >> Ivan
> >>
> >> > Il giorno 17 nov 2020, alle ore 00:35, Ivan Zahartchuk
> >> <adray0...@gmail.com <mailto:adray0...@gmail.com>> ha scritto:
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > That is, in theory, I can simply start two streams from two
> >> channels and further process them using certain direction finding
> >> algorithms?
> >> >
> >> >
> >>
> >>
> >> _______________________________________________
> >> USRP-users mailing list
> >> usrp-us...@lists.ettus.com
> >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> >>
> >
>
>
