Hi Ivan,
The TX/RX and RX2 are ports on the same receiver channel. As Julian says
there are two receivers, A and B. For a receive only application the RX2
ports are slightly better performing as they have one less switch that
the signal passes through.
Regards,
Derek
On 18/11/2020 14:01, Julian Arnold wrote:
Ivan,
to the best of my knowledge, there should not be any RX1 port.
Instead, you should have two (coherent) channels "A" and "B" both
allowing you to select one out of two available antenna ports when
receiving ("TX/RX" or "RX2").
Cheers,
Julian
On 11/18/20 10:31 AM, Ivan Zahartchuk via USRP-users wrote:
Another question of interest is which channels are coherent? Rx1 and
RX2 or RX1 and RX / TX?
вт, 17 нояб. 2020 г. в 01:56, Ivan Iudice <kron...@tiscali.it
<mailto:kron...@tiscali.it>>:
Right!
Be careful, DOA estimation using only 2 antennas works but it’s not
so accurate.
Enjoy!
Ivan
> Il giorno 17 nov 2020, alle ore 00:35, Ivan Zahartchuk
<adray0...@gmail.com <mailto:adray0...@gmail.com>> ha scritto:
>
>
>
>
>
> That is, in theory, I can simply start two streams from two
channels and further process them using certain direction finding
algorithms?
>
>
_______________________________________________
USRP-users mailing list
usrp-us...@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
