Dear all, Thanks all for your joined efforts in a RPi4 built. Please notice that we're highly interested in testing a compiled/built RPi4 SD Card image. If you have working RPi setup with eg Adalm-Pluto or SDR, we highly appreciate if you can share! Thanks and continue your good work! '73 Robert PE1MFU
Op ma 25 mei 2020 21:08 schreef Harald Fritzsche (DD0VS) <dd...@dd0vs.de>: > Hello Barry, all, > > i confirm that 1. step from page: > https://wiki.gnuradio.org/index.php/InstallingGRFromSource_on_Raspberry_Pi > building libuhd is working on a rPI4 (with 2GB). > > There is one change needed: > > The instruction: > cmake -DNEON_SIMD_ENABLE=OFF -DCMAKE_INSTALL_PREFIX=/usr/local ../ > > must be extended like this: > cmake -DNEON_SIMD_ENABLE=OFF -DCMAKE_CXX_FLAGS=-latomic > -DCMAKE_INSTALL_PREFIX=/usr/local ../ > (not sure whether this is the right list, maybe one can inform the > usrp-list too) > > Thank you! > > Next is testing if hardware is detected. > > Than i will go to building GR38 what failed for me some month ago. > > vy73 > Harald > DD0VS > > Am Mon, 25 May 2020 11:27:36 -0500 > schrieb Barry Duggan <ba...@dcsmail.net>: > > > Hi Glen, > > > > I have done several installs of GR 3.8 on my rPi 3B+. Here is the > > procedure: > > > https://wiki.gnuradio.org/index.php/InstallingGRFromSource_on_Raspberry_Pi > > > > I don't have a rPi 4 yet, but am interested to know if that procedure > > fails on it. I am using 2020-02-13-raspbian-buster-full. Do not skip > > any steps! It takes about 4 hours. > > > > Regards, > > >
