I was having some issues updating some of my stuff, so I decided to
buckle down, and you the new pybombs to try to get my setup installed
again. It works for a while and then errors out on UHD:
>>pybombs prefix init ~/pybombs -a myprefix -R gnuradio-default
<<snip>>
[ 86%] Building CXX object
gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*,
PyObject*, PyObject*)’:
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:26696:15:
error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’
(arg1)->set_gpio_debug(arg2,arg3);
^
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*,
PyObject*, PyObject*)’:
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:27979:16:
error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’
(*arg1)->set_gpio_debug(arg2,arg3);
^
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function ‘void init_uhd_swig()’:
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47019:91:
error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::ATR_REG_IDLE)));
^
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47020:94:
error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::ATR_REG_TX_ONLY)));
^
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47021:94:
error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::ATR_REG_RX_ONLY)));
^
/home/jmat/pybombs/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47022:98:
error: ‘ATR_REG_FULL_DUPLEX’ is not a member of ‘uhd::usrp::dboard_iface’
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::ATR_REG_FULL_DUPLEX)));
^
make[2]: ***
[gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error 1
make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
make: *** [all] Error 2
PyBOMBS.Packager.source - ERROR - Build failed. See output above for
error messages.
PyBOMBS.Packager.source - ERROR - Problem occurred while building
package gnuradio:
Build failed.
PyBOMBS.install_manager - ERROR - Error installing package gnuradio.
Aborting.
<<end snip>>
I assume I am having issues due to having stuff previously installed?
Is there a way around this? Also, if I want to use the latest RFNoC
branch in UHD, how am I going to need to check that out with the new
pybombs2?
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
