Hi Antonny, I might really just have misunderstood what you want. If Jeon's reply didn't solve your problem, I'd like to ask you to draw a proper diagram, with labeled axes, and your signal, and when and why that signal has a specifix value, and what kind of things you want to feed in and what kind of things you want to get out.
Best regards, Marcus On 07/01/2015 04:59 AM, Antonny Caesar wrote: > Marcus, I see what you mean, but you didn't understand what I wanna do. > Using a multiplier you are modificating the original signal. I don't > want to multiply the samples, I want nothing or the entire signal. > > What I mean is: > 0 = no signal at all, everything is 0 and not only a piece of the > signal. The entire sine wave times 0 -> sine x 0 = 0. > 1 = the entire signal, but not only a sample x 1, like you showed. I > need to multiply the everything by 1 and leave the signal pass. > > Abstract: > > "Nothing" if the control is 0, and "EVERYTHING" if the control is 1. I > don't need pieces of wave times 0 or 1, I need the whole signal times 0 > or 1, like a switch. Did you get it? It's hard to build it here. > > Thanks a lot. > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
