Hi Wafa, to cite an email of Marcus Leech (which I saidly can only find myself in citations):
>> This particular error comes from GCC running out of virtual memory during >> the compile. You'll need to attach an external disk, make a swapfile on >> it, and then attach said swapfile to >> the swap pool using "swapon". Please consult the internet, your administrator or IT helpdesk on how to set up a swap file on linux. But your real question was: > How to fix it in order to update gnuradio embedded on usrp e110? I think the answer here is that I still think it might be a bit early for you to work on the OFDM systems on your embedded device. First, you should get a little more accustomed to doing Software Radio on a PC, using simulations. After all, a simulation can give you a feeling on how much processing power you'll need to do the real-time transmission -- and if what you're planning to do is really feasible with your specific combination of hardware, system and optimization knowledge. Greetings, Marcus Müller On 22.05.2014 16:25, Wafa Elhajhmida wrote: > Hi, > > The USRP E 110 is connected to internet. > In fact, I followed the different commands described in the FAQ. But when I > typed > "make" I got this error : > > [ 49%] Built target _filter_swig_swig_tag > [ 49%] Building CXX object > gr-filter/swig/CMakeFiles/_filter_swig.dir/filter_swigPYTHON_wrap.cxx.o > g++: Internal error: Killed (program cc1plus) > Please submit a full bug report. > See > <http://gcc.gnu.org/bugs.html<https://owa.ece.fr/owa/redir.aspx?C=azMLHeTJTEeJAp-eApYyqBPwd5wXLNEIaWtGtAFgTFNK5I8pwshWTvAb5Aa2cq8hkqcLKU7Jt-8.&URL=>> > for instructions. > make[2]: *** > [gr-filter/swig/CMakeFiles/_filter_swig.dir/filter_swigPYTHON_wrap.cxx.o] > Error 1 > make[1]: *** [gr-filter/swig/CMakeFiles/_filter_swig.dir/all] Error 2 > make: *** [all] Error 2 > > > > How to fix it in order to update gnuradio embedded on usrp e110? > > Best regards, > > Wafa HAJ HMIDA > > > 2014-05-19 16:06 GMT+02:00 Wafa Elhajhmida <wafa.elhaj.hm...@gmail.com>: > >> I think I shall ask the network administrator to make the necessary >> configurations so that the usrp e110 will be recognized by the network. >> >> Thanks for helping, >> >> Best regards, >> >> Wafa HAJ HMIDA >> >> >> 2014-05-19 15:58 GMT+02:00 Wafa Elhajhmida <wafa.elhaj.hm...@gmail.com>: >> >> I tried the different commands but the command opkg update still don't >>> work. >>> >>> >>> >>> 2014-05-19 15:55 GMT+02:00 Wafa Elhajhmida <wafa.elhaj.hm...@gmail.com>: >>> >>> the output is : >>>> >>>> ifup: interface eth0 already configured >>>> >>>> >>>> 2014-05-19 15:39 GMT+02:00 Ettus Research Support <supp...@ettus.com>: >>>> >>>> I missed off the 'eth0' bit on the gateway setting: >>>>> >>>>> sudo route add default gw 192.168.1.1 eth0 >>>>> >>>>> >>>>> Mike >>>>> >>>>> -- >>>>> Mike Jameson M0MIK BSc MIET >>>>> Ettus Research Technical Support >>>>> Email: supp...@ettus.com >>>>> Web: http://ettus.com >>>>> >>>>> >>>>> On Mon, May 19, 2014 at 2:34 PM, Ettus Research Support < >>>>> supp...@ettus.com> wrote: >>>>> >>>>>> On Ubuntu the alternative way to set an IP address of 192.168.1.234, >>>>>> gateway of 192.168.1.1 and nameserver to 8.8.8.8 (google) is by doing the >>>>>> following: >>>>>> >>>>>> sudo ifconfig eth0 up >>>>>> sudo ifconfig eth0 192.168.1.234 >>>>>> sudo route add default gw 192.168.1.1 >>>>>> sudo echo "nameserver 8.8.8.8" > /etc/resolv.conf >>>>>> >>>>>> Mike >>>>>> >>>>>> -- >>>>>> Mike Jameson M0MIK BSc MIET >>>>>> Ettus Research Technical Support >>>>>> Email: supp...@ettus.com >>>>>> Web: http://ettus.com >>>>>> >>>>>> >>>>>> On Mon, May 19, 2014 at 2:14 PM, Marcus Müller < >>>>>> marcus.muel...@ettus.com> wrote: >>>>>> >>>>>>> Hi Wafa, >>>>>>> to download packages, you obviously need internet connectivity. >>>>>>> You need to manage that; as gr-discuss, we really can't help you with >>>>>>> that. >>>>>>> >>>>>>> Greetings, >>>>>>> Marcus >>>>>>> >>>>>>> On 19.05.2014 15:13, Wafa Elhajhmida wrote: >>>>>>>> I tried what you recommend me to do. But I got the same error, it >>>>>>> isn't >>>>>>>> able to download the files for update. >>>>>>>> Is there any other alternative to fix this error ? >>>>>>>> >>>>>>>> >>>>>>>> 2014-05-19 14:54 GMT+02:00 Ettus Research Support < >>>>>>> supp...@ettus.com>: >>>>>>>> >>>>>>>>> You need an IP address. >>>>>>>>> >>>>>>>>> Try: >>>>>>>>> >>>>>>>>> sudo dhclient eth0 >>>>>>>>> >>>>>>>>> Mike >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Mike Jameson M0MIK BSc MIET >>>>>>>>> Ettus Research Technical Support >>>>>>>>> Email: supp...@ettus.com >>>>>>>>> Web: http://ettus.com >>>>>>>>> >>>>>>>>> >>>>>>>>> On Mon, May 19, 2014 at 10:11 AM, Wafa Elhajhmida < >>>>>>>>> wafa.elhaj.hm...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> I connected the usrp e100 through an ethernet connection. >>>>>>>>>> >>>>>>>>>> And I obtained: >>>>>>>>>> >>>>>>>>>> root@usrp-e1xx:~# ifconfig eth0eth0 Link encap:Ethernet >>>>>>> HWaddr A0:36:FA:95:32:E9 inet6 addr: >>>>>>> fe80::a236:faff:fe95:32e9/64 Scope:Link UP BROADCAST RUNNING >>>>>>> MULTICAST MTU:1500 Metric:1 RX packets:334 errors:0 dropped:0 >>>>>>> overruns:0 frame:0 TX packets:52 errors:3 dropped:0 overruns:0 >>>>>>> carrier:0 collisions:0 txqueuelen:1000 RX bytes:22517 >>>>>>> (21.9 KiB) TX bytes:14498 (14.1 KiB) Interrupt:80 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> When I typed opkg update, I got this error. >>>>>>>>>> >>>>>>>>>> *root@usrp-e1xx:~# opkg update * >>>>>>>>>> >>>>>>>>>> *Downloading >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz< >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz >>>>>>>> .* >>>>>>>>>> >>>>>>>>>> * Downloading >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz< >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz>. >>>>>>> * >>>>>>>>>> >>>>>>>>>> *Downloading >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz< >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz >>>>>>>> .* >>>>>>>>>> >>>>>>>>>> * Collected errors: * >>>>>>>>>> >>>>>>>>>> ** opkg_download: Failed to download >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz< >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz>, >>>>>>> wget returned 1. * >>>>>>>>>> >>>>>>>>>> * * opkg_download: Failed to download >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz< >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz>, >>>>>>> wget returned 1. * >>>>>>>>>> >>>>>>>>>> ** opkg_download: Failed to download >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz< >>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz>, >>>>>>> wget returned 1.* >>>>>>>>>> >>>>>>>>>> Can you lead me how to fix this error. >>>>>>>>>> >>>>>>>>>> Thanks a lot, >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Best regards, >>>>>>>>>> >>>>>>>>>> Wafa HAJ HMIDA >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2014-05-16 23:58 GMT+02:00 Philip Balister <phi...@opensdr.com>: >>>>>>>>>> >>>>>>>>>> On 05/16/2014 10:28 AM, Wafa Elhajhmida wrote: >>>>>>>>>>>> Hi, >>>>>>>>>>>> >>>>>>>>>>>> Thank you for your reply . >>>>>>>>>>>> >>>>>>>>>>>> How shall I proceed in order to update GR on E 1xx to GR 3.7 to >>>>>>> obtain >>>>>>>>>>> the >>>>>>>>>>>> different blocks necessary >>>>>>>>>>> Use: >>>>>>>>>>> >>>>>>>>>>> opkg update >>>>>>>>>>> opkg upgrade >>>>>>>>>>> >>>>>>>>>>> to update the E100. >>>>>>>>>>> >>>>>>>>>>> This link should get you started installing gnuradio 3.7: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>> http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-do-I-install-GNU-Radio-from-source >>>>>>>>>>> >>>>>>>>>>>> to implement OFDM channel on USRP E 110 ? >>>>>>>>>>> I will be easier getting OFDM going with a USRP (such as a B200) >>>>>>>>>>> attached to a desktop computer first, then use this work to move >>>>>>> it to >>>>>>>>>>> the E100. The processor o the E100 is much slower, so it will be >>>>>>> harder >>>>>>>>>>> to work out what is your problem and what is a limitation of the >>>>>>>>>>> hardware and software that needs work to improve. >>>>>>>>>>> >>>>>>>>>>> Philip >>>>>>>>>>> >>>>>>>>>>> Philip >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Best regards, >>>>>>>>>>>> >>>>>>>>>>>> Wafa HAJ HMIDA >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2014-05-15 18:30 GMT+02:00 Marcus Leech <marcus.le...@ettus.com >>>>>>>> : >>>>>>>>>>>> >>>>>>>>>>>>> Phil: >>>>>>>>>>>>> >>>>>>>>>>>>> What is our current recommended procedure for updating GR on >>>>>>> the E1xx >>>>>>>>>>>>> series to GR3.7? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, May 15, 2014 at 11:35 AM, Ettus Research Support < >>>>>>>>>>>>> supp...@ettus.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> You can also look in: >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://files.ettus.com/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> Specifically the following link to some embedded files if >>>>>>> they are >>>>>>>>>>>>>> relevant: >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://files.ettus.com/e1xx_images/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> Mike >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Mike Jameson M0MIK BSc MIET >>>>>>>>>>>>>> Ettus Research Technical Support >>>>>>>>>>>>>> Email: supp...@ettus.com >>>>>>>>>>>>>> Web: http://ettus.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, May 15, 2014 at 4:33 PM, Mike Jameson < >>>>>>>>>>> mike.jame...@ettus.com>wrote: >>>>>>>>>>>>>>> Wafa, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I've forwarded this to the supp...@ettus.com address for the >>>>>>>>>>> Embedded >>>>>>>>>>>>>>> experts to answer this for you. The files are giving me a >>>>>>> 404 too >>>>>>>>>>> so >>>>>>>>>>>>>>> thanks for pointing this out. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Mike >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> Mike Jameson M0MIK BSc MIET >>>>>>>>>>>>>>> Ettus Research Technical Support >>>>>>>>>>>>>>> Email: supp...@ettus.com >>>>>>>>>>>>>>> Web: http://ettus.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thu, May 15, 2014 at 3:26 PM, Wafa Elhajhmida < >>>>>>>>>>>>>>> wafa.elhaj.hm...@gmail.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> First, I tried to update the bootfiles of usrp e110. But >>>>>>> these >>>>>>>>>>> links >>>>>>>>>>>>>>>> mentioned on Ettus website, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>> https://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/Updating_E1XX_Boot_Files_and_Kernel_Modules >>>>>>>>>>>>>>>> -http://dl.dropbox.com/u/14618236/MLO >>>>>>>>>>>>>>>> -http://dl.dropbox.com/u/14618236/u-boot.bin-for-2.6.38 >>>>>>>>>>>>>>>> - >>>>>>> http://dl.dropbox.com/u/14618236/uImage-2.6.38-r0a-usrp-e1xx.bin >>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>> http://dl.dropboxusercontent.com/u/14618236/modules-3.0-pm-r0d-usrp-e1xx.tgz >>>>>>>>>>>>>>>> don't work. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Can you give me other links where can I find the different >>>>>>> files >>>>>>>>>>> MLO, >>>>>>>>>>>>>>>> U-Boot, uImage. in order to make an up date of kernel and >>>>>>> boot >>>>>>>>>>> files. >>>>>>>>>>>>>>>> Second, How can I access to gnuradio embedded on usrp e 110 >>>>>>> in >>>>>>>>>>> order to >>>>>>>>>>>>>>>> show it on my screen. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Best regards, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Wafa HAJ HMIDA >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2014-05-13 14:28 GMT+02:00 Mike Jameson < >>>>>>> mike.jame...@ettus.com>: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If you Google "USRP E100 update gnuradio" it points to the >>>>>>>>>>> following >>>>>>>>>>>>>>>>> instructions: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>> http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-do-I-install-GNU-Radio-from-source >>>>>>>>>>>>>>>>> Mike >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> Mike Jameson M0MIK BSc MIET >>>>>>>>>>>>>>>>> Ettus Research Technical Support >>>>>>>>>>>>>>>>> Email: supp...@ettus.com >>>>>>>>>>>>>>>>> Web: http://ettus.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Tue, May 13, 2014 at 12:59 PM, Wafa Elhajhmida < >>>>>>>>>>>>>>>>> wafa.elhaj.hm...@gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> plz how to proceed ? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thanks a lot >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 2014-05-13 11:47 GMT+02:00 Wafa Elhajhmida < >>>>>>>>>>>>>>>>>> wafa.elhaj.hm...@gmail.com>: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>> I'm working on USRP E 110 card in order to implement OFDM >>>>>>>>>>> channel on >>>>>>>>>>>>>>>>>>> it. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> In fact, I would like to remove the old version of >>>>>>> gnuradio >>>>>>>>>>>>>>>>>>> installed in USRP E 110. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Then, I would like to install gnuradio 3.7.4 on USRP E >>>>>>> 110(the >>>>>>>>>>>>>>>>>>> version that as far as I know contains the different >>>>>>> blocks >>>>>>>>>>> necessary to >>>>>>>>>>>>>>>>>>> implement >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> OFDM channel on USRP E 110). >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Best regards, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Wafa HAJ HMIDA >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>> Discuss-gnuradio mailing list >>>>>>>>>>>>>>>>>> Discuss-gnuradio@gnu.org >>>>>>>>>>>>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Marcus Leech >>>>>>>>>>>>> Technical Support Assistant >>>>>>>>>>>>> Ettus Research LLC >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
