Hi, The USRP E 110 is connected to internet. In fact, I followed the different commands described in the FAQ. But when I typed "make" I got this error :
[ 49%] Built target _filter_swig_swig_tag [ 49%] Building CXX object gr-filter/swig/CMakeFiles/_filter_swig.dir/filter_swigPYTHON_wrap.cxx.o g++: Internal error: Killed (program cc1plus) Please submit a full bug report. See <http://gcc.gnu.org/bugs.html<https://owa.ece.fr/owa/redir.aspx?C=azMLHeTJTEeJAp-eApYyqBPwd5wXLNEIaWtGtAFgTFNK5I8pwshWTvAb5Aa2cq8hkqcLKU7Jt-8.&URL=>> for instructions. make[2]: *** [gr-filter/swig/CMakeFiles/_filter_swig.dir/filter_swigPYTHON_wrap.cxx.o] Error 1 make[1]: *** [gr-filter/swig/CMakeFiles/_filter_swig.dir/all] Error 2 make: *** [all] Error 2 How to fix it in order to update gnuradio embedded on usrp e110? Best regards, Wafa HAJ HMIDA 2014-05-19 16:06 GMT+02:00 Wafa Elhajhmida <wafa.elhaj.hm...@gmail.com>: > I think I shall ask the network administrator to make the necessary > configurations so that the usrp e110 will be recognized by the network. > > Thanks for helping, > > Best regards, > > Wafa HAJ HMIDA > > > 2014-05-19 15:58 GMT+02:00 Wafa Elhajhmida <wafa.elhaj.hm...@gmail.com>: > > I tried the different commands but the command opkg update still don't >> work. >> >> >> >> 2014-05-19 15:55 GMT+02:00 Wafa Elhajhmida <wafa.elhaj.hm...@gmail.com>: >> >> the output is : >>> >>> ifup: interface eth0 already configured >>> >>> >>> 2014-05-19 15:39 GMT+02:00 Ettus Research Support <supp...@ettus.com>: >>> >>> I missed off the 'eth0' bit on the gateway setting: >>>> >>>> sudo route add default gw 192.168.1.1 eth0 >>>> >>>> >>>> Mike >>>> >>>> -- >>>> Mike Jameson M0MIK BSc MIET >>>> Ettus Research Technical Support >>>> Email: supp...@ettus.com >>>> Web: http://ettus.com >>>> >>>> >>>> On Mon, May 19, 2014 at 2:34 PM, Ettus Research Support < >>>> supp...@ettus.com> wrote: >>>> >>>>> On Ubuntu the alternative way to set an IP address of 192.168.1.234, >>>>> gateway of 192.168.1.1 and nameserver to 8.8.8.8 (google) is by doing the >>>>> following: >>>>> >>>>> sudo ifconfig eth0 up >>>>> sudo ifconfig eth0 192.168.1.234 >>>>> sudo route add default gw 192.168.1.1 >>>>> sudo echo "nameserver 8.8.8.8" > /etc/resolv.conf >>>>> >>>>> Mike >>>>> >>>>> -- >>>>> Mike Jameson M0MIK BSc MIET >>>>> Ettus Research Technical Support >>>>> Email: supp...@ettus.com >>>>> Web: http://ettus.com >>>>> >>>>> >>>>> On Mon, May 19, 2014 at 2:14 PM, Marcus Müller < >>>>> marcus.muel...@ettus.com> wrote: >>>>> >>>>>> Hi Wafa, >>>>>> to download packages, you obviously need internet connectivity. >>>>>> You need to manage that; as gr-discuss, we really can't help you with >>>>>> that. >>>>>> >>>>>> Greetings, >>>>>> Marcus >>>>>> >>>>>> On 19.05.2014 15:13, Wafa Elhajhmida wrote: >>>>>> > I tried what you recommend me to do. But I got the same error, it >>>>>> isn't >>>>>> > able to download the files for update. >>>>>> > Is there any other alternative to fix this error ? >>>>>> > >>>>>> > >>>>>> > 2014-05-19 14:54 GMT+02:00 Ettus Research Support < >>>>>> supp...@ettus.com>: >>>>>> > >>>>>> >> You need an IP address. >>>>>> >> >>>>>> >> Try: >>>>>> >> >>>>>> >> sudo dhclient eth0 >>>>>> >> >>>>>> >> Mike >>>>>> >> >>>>>> >> -- >>>>>> >> Mike Jameson M0MIK BSc MIET >>>>>> >> Ettus Research Technical Support >>>>>> >> Email: supp...@ettus.com >>>>>> >> Web: http://ettus.com >>>>>> >> >>>>>> >> >>>>>> >> On Mon, May 19, 2014 at 10:11 AM, Wafa Elhajhmida < >>>>>> >> wafa.elhaj.hm...@gmail.com> wrote: >>>>>> >> >>>>>> >>> Hi, >>>>>> >>> >>>>>> >>> I connected the usrp e100 through an ethernet connection. >>>>>> >>> >>>>>> >>> And I obtained: >>>>>> >>> >>>>>> >>> root@usrp-e1xx:~# ifconfig eth0eth0 Link encap:Ethernet >>>>>> HWaddr A0:36:FA:95:32:E9 inet6 addr: >>>>>> fe80::a236:faff:fe95:32e9/64 Scope:Link UP BROADCAST RUNNING >>>>>> MULTICAST MTU:1500 Metric:1 RX packets:334 errors:0 dropped:0 >>>>>> overruns:0 frame:0 TX packets:52 errors:3 dropped:0 overruns:0 >>>>>> carrier:0 collisions:0 txqueuelen:1000 RX bytes:22517 >>>>>> (21.9 KiB) TX bytes:14498 (14.1 KiB) Interrupt:80 >>>>>> >>> >>>>>> >>> >>>>>> >>> When I typed opkg update, I got this error. >>>>>> >>> >>>>>> >>> *root@usrp-e1xx:~# opkg update * >>>>>> >>> >>>>>> >>> *Downloading >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz< >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz >>>>>> >.* >>>>>> >>> >>>>>> >>> * Downloading >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz< >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz>. >>>>>> * >>>>>> >>> >>>>>> >>> *Downloading >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz< >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz >>>>>> >.* >>>>>> >>> >>>>>> >>> * Collected errors: * >>>>>> >>> >>>>>> >>> ** opkg_download: Failed to download >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz< >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz>, >>>>>> wget returned 1. * >>>>>> >>> >>>>>> >>> * * opkg_download: Failed to download >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz< >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz>, >>>>>> wget returned 1. * >>>>>> >>> >>>>>> >>> ** opkg_download: Failed to download >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz< >>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz>, >>>>>> wget returned 1.* >>>>>> >>> >>>>>> >>> Can you lead me how to fix this error. >>>>>> >>> >>>>>> >>> Thanks a lot, >>>>>> >>> >>>>>> >>> >>>>>> >>> Best regards, >>>>>> >>> >>>>>> >>> Wafa HAJ HMIDA >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> 2014-05-16 23:58 GMT+02:00 Philip Balister <phi...@opensdr.com>: >>>>>> >>> >>>>>> >>> On 05/16/2014 10:28 AM, Wafa Elhajhmida wrote: >>>>>> >>>>> Hi, >>>>>> >>>>> >>>>>> >>>>> Thank you for your reply . >>>>>> >>>>> >>>>>> >>>>> How shall I proceed in order to update GR on E 1xx to GR 3.7 to >>>>>> obtain >>>>>> >>>> the >>>>>> >>>>> different blocks necessary >>>>>> >>>> Use: >>>>>> >>>> >>>>>> >>>> opkg update >>>>>> >>>> opkg upgrade >>>>>> >>>> >>>>>> >>>> to update the E100. >>>>>> >>>> >>>>>> >>>> This link should get you started installing gnuradio 3.7: >>>>>> >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-do-I-install-GNU-Radio-from-source >>>>>> >>>> >>>>>> >>>>> to implement OFDM channel on USRP E 110 ? >>>>>> >>>> I will be easier getting OFDM going with a USRP (such as a B200) >>>>>> >>>> attached to a desktop computer first, then use this work to move >>>>>> it to >>>>>> >>>> the E100. The processor o the E100 is much slower, so it will be >>>>>> harder >>>>>> >>>> to work out what is your problem and what is a limitation of the >>>>>> >>>> hardware and software that needs work to improve. >>>>>> >>>> >>>>>> >>>> Philip >>>>>> >>>> >>>>>> >>>> Philip >>>>>> >>>> >>>>>> >>>> >>>>>> >>>>> Best regards, >>>>>> >>>>> >>>>>> >>>>> Wafa HAJ HMIDA >>>>>> >>>>> >>>>>> >>>>> >>>>>> >>>>> 2014-05-15 18:30 GMT+02:00 Marcus Leech <marcus.le...@ettus.com >>>>>> >: >>>>>> >>>>> >>>>>> >>>>>> Phil: >>>>>> >>>>>> >>>>>> >>>>>> What is our current recommended procedure for updating GR on >>>>>> the E1xx >>>>>> >>>>>> series to GR3.7? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Thu, May 15, 2014 at 11:35 AM, Ettus Research Support < >>>>>> >>>>>> supp...@ettus.com> wrote: >>>>>> >>>>>> >>>>>> >>>>>>> You can also look in: >>>>>> >>>>>>> >>>>>> >>>>>>> http://files.ettus.com/ >>>>>> >>>>>>> >>>>>> >>>>>>> Specifically the following link to some embedded files if >>>>>> they are >>>>>> >>>>>>> relevant: >>>>>> >>>>>>> >>>>>> >>>>>>> http://files.ettus.com/e1xx_images/ >>>>>> >>>>>>> >>>>>> >>>>>>> Mike >>>>>> >>>>>>> >>>>>> >>>>>>> -- >>>>>> >>>>>>> Mike Jameson M0MIK BSc MIET >>>>>> >>>>>>> Ettus Research Technical Support >>>>>> >>>>>>> Email: supp...@ettus.com >>>>>> >>>>>>> Web: http://ettus.com >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>>> On Thu, May 15, 2014 at 4:33 PM, Mike Jameson < >>>>>> >>>> mike.jame...@ettus.com>wrote: >>>>>> >>>>>>>> Wafa, >>>>>> >>>>>>>> >>>>>> >>>>>>>> I've forwarded this to the supp...@ettus.com address for the >>>>>> >>>> Embedded >>>>>> >>>>>>>> experts to answer this for you. The files are giving me a >>>>>> 404 too >>>>>> >>>> so >>>>>> >>>>>>>> thanks for pointing this out. >>>>>> >>>>>>>> >>>>>> >>>>>>>> Mike >>>>>> >>>>>>>> >>>>>> >>>>>>>> -- >>>>>> >>>>>>>> Mike Jameson M0MIK BSc MIET >>>>>> >>>>>>>> Ettus Research Technical Support >>>>>> >>>>>>>> Email: supp...@ettus.com >>>>>> >>>>>>>> Web: http://ettus.com >>>>>> >>>>>>>> >>>>>> >>>>>>>> >>>>>> >>>>>>>> On Thu, May 15, 2014 at 3:26 PM, Wafa Elhajhmida < >>>>>> >>>>>>>> wafa.elhaj.hm...@gmail.com> wrote: >>>>>> >>>>>>>> >>>>>> >>>>>>>>> Hi, >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> First, I tried to update the bootfiles of usrp e110. But >>>>>> these >>>>>> >>>> links >>>>>> >>>>>>>>> mentioned on Ettus website, >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> >>>>>> >>>> >>>>>> https://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/Updating_E1XX_Boot_Files_and_Kernel_Modules >>>>>> >>>>>>>>> -http://dl.dropbox.com/u/14618236/MLO >>>>>> >>>>>>>>> -http://dl.dropbox.com/u/14618236/u-boot.bin-for-2.6.38 >>>>>> >>>>>>>>> - >>>>>> http://dl.dropbox.com/u/14618236/uImage-2.6.38-r0a-usrp-e1xx.bin >>>>>> >>>>>>>>> - >>>>>> >>>>>>>>> >>>>>> >>>> >>>>>> http://dl.dropboxusercontent.com/u/14618236/modules-3.0-pm-r0d-usrp-e1xx.tgz >>>>>> >>>>>>>>> don't work. >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> Can you give me other links where can I find the different >>>>>> files >>>>>> >>>> MLO, >>>>>> >>>>>>>>> U-Boot, uImage. in order to make an up date of kernel and >>>>>> boot >>>>>> >>>> files. >>>>>> >>>>>>>>> Second, How can I access to gnuradio embedded on usrp e 110 >>>>>> in >>>>>> >>>> order to >>>>>> >>>>>>>>> show it on my screen. >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> Best regards, >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> Wafa HAJ HMIDA >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> 2014-05-13 14:28 GMT+02:00 Mike Jameson < >>>>>> mike.jame...@ettus.com>: >>>>>> >>>>>>>>> >>>>>> >>>>>>>>> If you Google "USRP E100 update gnuradio" it points to the >>>>>> >>>> following >>>>>> >>>>>>>>>> instructions: >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> >>>>>> >>>> >>>>>> http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-do-I-install-GNU-Radio-from-source >>>>>> >>>>>>>>>> Mike >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> -- >>>>>> >>>>>>>>>> Mike Jameson M0MIK BSc MIET >>>>>> >>>>>>>>>> Ettus Research Technical Support >>>>>> >>>>>>>>>> Email: supp...@ettus.com >>>>>> >>>>>>>>>> Web: http://ettus.com >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>> On Tue, May 13, 2014 at 12:59 PM, Wafa Elhajhmida < >>>>>> >>>>>>>>>> wafa.elhaj.hm...@gmail.com> wrote: >>>>>> >>>>>>>>>> >>>>>> >>>>>>>>>>> plz how to proceed ? >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> Thanks a lot >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> 2014-05-13 11:47 GMT+02:00 Wafa Elhajhmida < >>>>>> >>>>>>>>>>> wafa.elhaj.hm...@gmail.com>: >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> Hi, >>>>>> >>>>>>>>>>>> I'm working on USRP E 110 card in order to implement OFDM >>>>>> >>>> channel on >>>>>> >>>>>>>>>>>> it. >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>>> In fact, I would like to remove the old version of >>>>>> gnuradio >>>>>> >>>>>>>>>>>> installed in USRP E 110. >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>>> Then, I would like to install gnuradio 3.7.4 on USRP E >>>>>> 110(the >>>>>> >>>>>>>>>>>> version that as far as I know contains the different >>>>>> blocks >>>>>> >>>> necessary to >>>>>> >>>>>>>>>>>> implement >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>>> OFDM channel on USRP E 110). >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>>> Best regards, >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>>> Wafa HAJ HMIDA >>>>>> >>>>>>>>>>>> >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> _______________________________________________ >>>>>> >>>>>>>>>>> Discuss-gnuradio mailing list >>>>>> >>>>>>>>>>> Discuss-gnuradio@gnu.org >>>>>> >>>>>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>>>> >>>>>>>>>>> >>>>>> >>>>>>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Marcus Leech >>>>>> >>>>>> Technical Support Assistant >>>>>> >>>>>> Ettus Research LLC >>>>>> >>>>>> >>>>>> >>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
