Hi Thanks for the suggestion. I could burn the images finally after renaming the file to u2plus_usrp_n200_r4_fpga.bin and using ./usrp_n2xx_net_burner_gui.py --dont-check-rev (It was showing error even with u2plus_r4.bin or u2plus_n200_r4.bin)
Amy On 07/24/2013 12:48 PM, Amy Kumar wrote: Hi I made a change in the u2plus_core.v and generated a new bin file using: make -f Makefile.N200R4 bin When I try burning the new FPGA image to USRP N200 R4, I get the following error: 'Error: incorrect FPGA image version.Please use the correct image for device n200_r4' I think the revision I've used is correct. I don't understand why I am getting this error. Any suggestions would be appreciated. Amy _______________________________________________ Discuss-gnuradio mailing listDiscuss-gnuradio@gnu.orghttps://lists.gnu.org/mailman/listinfo/discuss-gnuradio I think it just checks the filename to make sure that it ends in "_r4". If you're making your own images, and using your own filenames, you should probably use --dont-check-rev Here's the --help: Usage: usrp_n2xx_net_burner.py [options] Options: -h, --help show this help message and exit --addr=ADDR USRP-N2XX device address --fw=FW firmware image path (optional) --fpga=FPGA fpga image path (optional) --reset reset the device after writing --read read to file instead of write from file --overwrite-safe never ever use this option --dont-check-rev disable revision checks --list list possible network devices -- Marcus Leech Principal Investigator Shirleys Bay Radio Astronomy Consortiumhttp://www.sbrac.org
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
