> Thanks very much Josh. Yes the device is found : > > Loading firmware image: /usr/share/uhd/images/usrp1_fw.ihx... done > -------------------------------------------------- > -- UHD Device 0 > -------------------------------------------------- > Device Address: > type: usrp1 > name: > serial: 4c745353 > > Just to be crystal clear, A UHD implementation of a GNURadio-Companion file > is the same as GNURadio i.e. source is USRP not UHD for USRP1? >
Use the blocks in the UHD category (not USRP). Also, the floating point samples are between -1.0 and 1.0 which is different than the old driver, so that could change things depending upon your app. Its best to run it and see what happens. :-) > Also, when I populate with the DBSRX2 in addition to LFRX, can I run both? I > saw a post from August saying something about only 1 i/o path at the moment. > Both channels should work. Configure the single usrp block for two channels and setup the subdevice specification string (should be docs for this in the block properties dialog box). -josh _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
