On 12/25/2010 05:01 PM, john wrote: >> A while ago I purchased a DBSRX2 so I am trying to shift my system to >> UHD. I don't mind having the default UHD behaviour of 2 up/ 2 down which >> I believe is the default FPGA etc. >> >> I have gone into Gnuradio-comp and converted the USRP source to a UHD >> one but it needs an IP address so I don't think that is how I convert >> the USRP from being GNU to UHD. >>
>USB based devices do not have IP addresses. See the docs in the block > properties. Also see > > http://www.ettus.com/uhd_docs/manual/html/identification.html#identifying-usrps >Also make sure that uhd_find_devices can find your device. >Peace Thanks very much Josh. Yes the device is found : Loading firmware image: /usr/share/uhd/images/usrp1_fw.ihx... done -------------------------------------------------- -- UHD Device 0 -------------------------------------------------- Device Address: type: usrp1 name: serial: 4c745353 Just to be crystal clear, A UHD implementation of a GNURadio-Companion file is the same as GNURadio i.e. source is USRP not UHD for USRP1? Also, when I populate with the DBSRX2 in addition to LFRX, can I run both? I saw a post from August saying something about only 1 i/o path at the moment. Hopefully, I will be smarter in 2011. Kind Regards, John _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
