Now, I have done complete new installation of Fedora-13, and installed all the dependencies as mentioned in build guide. After that i have run git and cloned gnuradio to get latest source. after that i have run
# ./bootstrap # ./configure # make # make check # sudo make install I have collected logs from terminal after i ran "make" and have attached file for your reference. I saw some warnings at last few lines. after installing gnuradio i went and checked usrp_dbid.dat and found these lines "WBX NG TX" 0x0052 "WBX NG RX" 0x0053 and then i checked usrp_dbid.h and found these lines #define USRP_DBID_WBX_NG_TX 0x0052 #define USRP_DBID_WBX_NG_RX 0x0053 and at last i checked usrp_dbid.py in usrpm folder and found following lines # # Machine generated by gen_usrp_dbid.py from usrp_dbid.dat # Do not edit by hand. All edits will be overwritten. # # # USRP Daughterboard ID's # BASIC_TX = 0x0000 BASIC_RX = 0x0001 DBS_RX = 0x0002 TV_RX = 0x0003 FLEX_400_RX = 0x0004 FLEX_900_RX = 0x0005 FLEX_1200_RX = 0x0006 FLEX_2400_RX = 0x0007 FLEX_400_TX = 0x0008 FLEX_900_TX = 0x0009 FLEX_1200_TX = 0x000a FLEX_2400_TX = 0x000b TV_RX_REV_2 = 0x000c DBS_RX_CLKMOD = 0x000d LF_TX = 0x000e LF_RX = 0x000f FLEX_400_RX_MIMO_A = 0x0014 FLEX_900_RX_MIMO_A = 0x0015 FLEX_1200_RX_MIMO_A = 0x0016 FLEX_2400_RX_MIMO_A = 0x0017 FLEX_400_TX_MIMO_A = 0x0018 FLEX_900_TX_MIMO_A = 0x0019 FLEX_1200_TX_MIMO_A = 0x001a FLEX_2400_TX_MIMO_A = 0x001b FLEX_400_RX_MIMO_B = 0x0024 FLEX_900_RX_MIMO_B = 0x0025 FLEX_1200_RX_MIMO_B = 0x0026 FLEX_2400_RX_MIMO_B = 0x0027 FLEX_400_TX_MIMO_B = 0x0028 FLEX_900_TX_MIMO_B = 0x0029 FLEX_1200_TX_MIMO_B = 0x002a FLEX_2400_TX_MIMO_B = 0x002b FLEX_1800_RX = 0x0030 FLEX_1800_TX = 0x0031 FLEX_1800_RX_MIMO_A = 0x0032 FLEX_1800_TX_MIMO_A = 0x0033 FLEX_1800_RX_MIMO_B = 0x0034 FLEX_1800_TX_MIMO_B = 0x0035 TV_RX_REV_3 = 0x0040 DTT754 = 0x0041 DTT768 = 0x0042 WBX_LO_TX = 0x0050 WBX_LO_RX = 0x0051 XCVR2450_TX = 0x0060 XCVR2450_RX = 0x0061 EXPERIMENTAL_TX = 0xfffe EXPERIMENTAL_RX = 0xffff Can you please tell me why these following daughterboard ID's are missing in usrp_dbid.py. "TV Rx MIMO" 0x0043 "TV Rx Rev 2 MIMO" 0x0044 "TV Rx Rev 3 MIMO" 0x0045 "WBX NG TX" 0x0052 "WBX NG RX" 0x0053 "Bitshark Rx" 0x0070 Regards sanjay On Fri, Dec 3, 2010 at 2:18 AM, Jason Abele <ja...@ettus.com> wrote: > On Thu, Dec 2, 2010 at 9:03 AM, Sanjay Singh > <sanjaysinghshyam...@gmail.com> wrote: > > I have done complete new installation of Ubuntu 9.04 Jaunty and installed > > Binary packege of GNURADIO(3.2.2). > > > Can any one tell me why wbx_ng daughterbord ID is missing. > > > > Because GNUradio 3.2.2 was released before the WBX ... you will need > to get at least 3.3.0 or backport the WBX code > > Jason >
Make
Description: Binary data
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
