On 04/30/2010 11:07 AM, Josh Blum wrote: > > > I know you got me off-list, but I would like to share the answer > because people tend to google these things and get list postings: > > The solution was to set a static IP address on the network interface. > Its not like the raw ethernet communication where sometimes you needed > a static ip to make a particular interface work. You always need the > static IP address to send and receive the UDP packets. > > Also, you should not need the sudo. uhd_find_devices works fine as > normal user. > > And a little trivia for today: The "F" LED on the USRP2 is actually > light (faintly). > > -Josh > > How does the USRP2 get its IP address, how do you deal with multiple USRP2 on the same host? With IP routing, you'll generally need to have each USRP2/Host combination have its own (probably very small) subnet, but you *do* have to get the routing correct!
When you throw an IP packet "into the stack", the IP routing machinery in the stack figures out which interface to send the packet on, based on the subnet mask assigned to an interface. So you need to make sure that your USRP2 has a distinct subnet assigned, so that it can be routed to appropriately. -- Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
