On 03/16/2010 10:52 PM, Andrew Rich wrote:
Thanks Nick
I have some more questions if I may
1) What determines the bandwidth of the daughter boards for USRP ?
The bandwidth is limited by the data rate back to the computer, so with
the USRP1 you get 8 MHz of RF BW, and with the USRP2 you get 25 MHz.
The exception is the TVRX daughterboard which has SAW filters that limit
you to 6 MHz.
2) Where do you connect if you want to bypass the RF board and connect
at base band ?
Use the LFRX daughterboards instead. They give you baseband inputs.
3) Will I be able to achieve what I want to achieve on openSUSE linux ?
Yes
4) When you talk about "code" what language ?
C++, Python, or using GRC which is a graphical design system.
5) What is a trunk when you talk about gnu ? is that the software base ?
Yes
6) I assume I can get an RF board and do 1030 MHz as well ?
Yes. The DBSRX will receive that frequency, as will the WBX and RFX900/
7) Can I use perl to do any of this ?
Probably not.
8) Would someone be able to guide me through this.
9) Is a "PC" suitable and quick enough to keep up with the signals ?
Yes.
Does the USRP and code lag or is there plenty of time left over ?
Not sure what this means. People have done what you are trying to do
already and it works.
Matt
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
