Thanks so much, this is exactly what I am eventually trying to accomplish.
Sampling 4 real signals using two LFRX daughtercards
Thanks,
Dan
--- On Wed, 3/10/10, Sebastiaan Heunis <sheu...@gmail.com> wrote:
From: Sebastiaan Heunis <sheu...@gmail.com>
Subject: Re: [Discuss-gnuradio] Multiple Channel USRP Confusion
To: "Karthik" <karthik1...@gmail.com>
Cc: "dan s" <dsurfe...@yahoo.com>, discuss-gnuradio@gnu.org
Date: Wednesday, March 10, 2010, 1:13 PM
Dan
I haven't used GNURadio companion before, but what you need to do is the
following:
Set the mux to (0xf1f0f1f0). This will connect ADC0 (which is the first ADC on
side A) to the I input of the first DDC in the USRP. ADC1 (which is also on
side A) will be connected to the I input of the second ADC. Then you just wire
up your two chains in your GNURadio apps and use a deinterleaver to connect the
appropriate channel to the right blocks in your app. There is an example app
somewhere in the Gnuradio installation directory that shows how to receive 4
real channels with 2 LFRX boards.
Sebastiaan
On Tue, Mar 9, 2010 at 10:33 PM, dan s <dsurfe...@yahoo.com> wrote:
Hi all,
I am looking to simultaneously record two real signals (not with IQ) using a
single LFRX daughtercard.
How can I do this with GNURadio companion? I have spent a while looking at the
USRP Source and Dual USRP Source blocks and could not figure out.
I am looking to record from Side A with RXA and RXB. I tried setting the RX
Antenna setting to RXAB and used the complex to real block to extract channel
RXA, and complex to imaginary block to extract RXB. I don't think this worked
properly.
I also tried using two separate USRP source blocks, each on side A but one for
RXA and the other for RXB. When I did this I got an error related to already
having one USRP side A block running.
Any help would be greatly appreciated
Thanks,
Dan
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
