Awesome, thanks guys, I built the current git version and it works perfectly.
Regards, Matt On Fri, Feb 5, 2010 at 4:19 PM, Matt Ettus <m...@ettus.com> wrote: > > > Yes, the releases don't support the WBX, you need git. > > Matt > > On 02/04/2010 09:04 PM, Timothy Newman wrote: >> >> I believe you need to use the current source from the git tree, not the >> 3.2.2 tarball. >> >> Tim >> >> Matthew Robert wrote: >>> >>> Hi List, >>> >>> I have a USRP1 with a WBX in the B side and a DBSRX in the A side. I >>> have just done a fresh install of the stable tarball (3.2.2) and I ran >>> the usrper load_standard_bits. The USRP1 serial number is in the >>> 3700-3800 range so I believe it is compatible with the WBX. >>> >>> When I run usrp_benchmark I get the following error:- >>> >>> >>> >>> Testing 32MB/sec... >>> Warning: Treating daughterboard with invalid EEPROM contents as if it >>> were a "Basic Tx." >>> Warning: This is almost certainly wrong... Use appropriate >>> burn-*-eeprom utility. >>> >>> >>> Warning: Treating daughterboard with invalid EEPROM contents as if it >>> were a "Basic Rx." >>> Warning: This is almost certainly wrong... Use appropriate >>> burn-*-eeprom utility. >>> >>> uUusb_throughput = 32M >>> ntotal = 16000000 >>> nright = 15988058 >>> runlength = 15988058 >>> delta = 11942 >>> OK >>> Max USB/USRP throughput = 32MB/sec >>> >>> >>> Is there something more I need to do to make this work? >>> >>> Cheers, >>> Matt >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
