I believe you need to use the current source from the git tree, not the
3.2.2 tarball.
Tim
Matthew Robert wrote:
Hi List,
I have a USRP1 with a WBX in the B side and a DBSRX in the A side. I
have just done a fresh install of the stable tarball (3.2.2) and I ran
the usrper load_standard_bits. The USRP1 serial number is in the
3700-3800 range so I believe it is compatible with the WBX.
When I run usrp_benchmark I get the following error:-
Testing 32MB/sec...
Warning: Treating daughterboard with invalid EEPROM contents as if it
were a "Basic Tx."
Warning: This is almost certainly wrong... Use appropriate
burn-*-eeprom utility.
Warning: Treating daughterboard with invalid EEPROM contents as if it
were a "Basic Rx."
Warning: This is almost certainly wrong... Use appropriate
burn-*-eeprom utility.
uUusb_throughput = 32M
ntotal = 16000000
nright = 15988058
runlength = 15988058
delta = 11942
OK
Max USB/USRP throughput = 32MB/sec
Is there something more I need to do to make this work?
Cheers,
Matt
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
