On Thu, Feb 19, 2009 at 01:21:37PM -0500, jim graham wrote: > Eric > > We are using Fedora Linux version 7 on an x86 machine.
OK. [Please be sure to hit Reply-All to reply to the writer and the list.] > The GNU radio software is Revision 10211 (jcorgan) > Last change date 1/12/2009 > > We have the USRP 2 connected to a directional antenna. I have used the > dbs daughtercard hooked to the same antenna with a USRP 1 to verify > a signal is present. > > For the dbs and lfrx daughtercards are the set_center_freq outputs of 0 for > Baseband freq and -commanded freq for ddc freq correct? > The output of the call using a flex1800 daughtercard is different. What rx_daughterboard_id() does the USRP2 report for your RFX 1800? With regard to RFX boards, the USRP2 only supports the MIMO_B version. Any board that the firmware doesn't recognize is treated as a Basic Rx or Basic Tx. Eric _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
