On Thu, Feb 19, 2009 at 10:15:29AM -0500, jim graham wrote: > I am trying to use the USRP 2 radio. I have been using the > rx_streaming_sample script to collect data. > > If I use the rfx1800 daughtercard the results from the set_center_freq > command seem correct but the output > > looks as if the receive channel is not connected (changing gain does not > affect output levels).
What OS, version, distribution, architecture? Which version of the GNU Radio code? Are you feeding this with a signal generator? What's your input signal level? Which antenna port are you connected to? Have you tried running usrp2_fft.py? > If I try the lfrx or dbs daughter cards the set_center_freq response > appears incorrect. The baseband frequency is 0 and the ddc frequency > is the negative of the commanded frequency. Those values are correct. Have you tried injecting a signal into the board and looking at it using usrp2_fft.py? Eric _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
