Hi try to run usrp_oscope.py and usrp_fft.py, which are gui type exaples. but application run then it show oUoUoU error, which I fount the USRP overrun. I run all this on VMware platform. I am using amd 64 turion, 3gb ram configuration. So I do not able to understand why my system getting low.
Also I would like to run FM radio, I have only one tx and one rx board, can I run sterio FM, thanks and regards tushar On Thu, Jan 29, 2009 at 1:58 PM, Mir Ali <mirmurt...@gmail.com> wrote: > great. test your installation with the following programs to start with. > Look in the following directory /usr/local/share/gnuradio/examples > > There are lots of examples that you can start with. In the digital > directory you can use benchmark_tx.py and bechmark_rx.py to test transmit > and receive using two USRPs. You can use tunnel.py to make usrp behave as > ethernet . Test the sound card using the programs in audio directory. > > If you have questions then ask us. :-) > > Bye > Ali > > > On Thu, Jan 29, 2009 at 2:10 AM, Tushar Patel <pateltusha...@gmail.com>wrote: > >> Hi I able to detect the USPR board with VM ware player. >> I also test with the command shows in help >> ls -lR /dev/bus/usb | grep usrp >> i got the output as per mention, >> Now I have the basic Tx and basic Rx board, so what are the example >> availble on which I can run with these basic Tx anr basic Rx board ? >> thanks and regards >> tushar patel >> >> >> On Wed, Jan 28, 2009 at 1:21 PM, Mir Ali <mirmurt...@gmail.com> wrote: >> >>> Did u do as Eric asked you to? Download the latest gnuradio svn tar and >>> follow the install instructions. >>> >>> On Wed, Jan 28, 2009 at 2:52 PM, Tushar Patel >>> <pateltusha...@gmail.com>wrote: >>> >>>> I found the linux/compiler.h file in other place, I gave the path in >>>> fusb_linux.cc and able to run all make, check make, install make. >>>> It will gererate the usrp_firmware.ihx file also but it will generate in >>>> rev0 and rev1, I used the usrp-0.5 tar from your link. >>>> still I do not able to detact my USRP hardware, >>>> so that USRP tar is old or what, I do not able to resolve it >>>> pl. guide me >>>> >>>> On Sun, Jan 25, 2009 at 9:07 PM, Eric Blossom <e...@comsec.com> wrote: >>>> >>>>> On Sun, Jan 25, 2009 at 05:14:55PM -0800, Tushar Patel wrote: >>>>> > ---------- Forwarded message ---------- >>>>> > From: Tushar Patel <pateltusha...@gmail.com> >>>>> > Date: Fri, 23 Jan 2009 21:28:32 -0800 >>>>> > Subject: problem with USRP >>>>> > To: Eric Blossom <e...@comsec.com> >>>>> > >>>>> > Hi Eric, >>>>> > I used the VM Ware player , on which i run my linux- UBUNTU-8.04 >>>>> > I am able to configure all gnu software packages perfectly, I was >>>>> able to >>>>> > run "hello world" example. >>>>> >>>>> You appear to be compiling ancient code. >>>>> >>>>> Please use either the svn trunk or the latest tarball. >>>>> >>>>> http://gnuradio.org/trac/wiki/Download >>>>> http://gnuradio.org/trac/wiki/BuildGuide >>>>> >>>>> Eric >>>>> >>>> >>>> >>>> _______________________________________________ >>>> Discuss-gnuradio mailing list >>>> Discuss-gnuradio@gnu.org >>>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>> >>>> >>> >>> >>> -- >>> Mir Murtuza Ali >>> Graduate Student >>> Center for Wireless Communications >>> University of Mississippi >>> University, MS 38677 >>> >>> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> > > >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
