great. test your installation with the following programs to start with. Look in the following directory /usr/local/share/gnuradio/examples
There are lots of examples that you can start with. In the digital directory you can use benchmark_tx.py and bechmark_rx.py to test transmit and receive using two USRPs. You can use tunnel.py to make usrp behave as ethernet . Test the sound card using the programs in audio directory. If you have questions then ask us. :-) Bye Ali On Thu, Jan 29, 2009 at 2:10 AM, Tushar Patel <pateltusha...@gmail.com>wrote: > Hi I able to detect the USPR board with VM ware player. > I also test with the command shows in help > ls -lR /dev/bus/usb | grep usrp > i got the output as per mention, > Now I have the basic Tx and basic Rx board, so what are the example > availble on which I can run with these basic Tx anr basic Rx board ? > thanks and regards > tushar patel > > > On Wed, Jan 28, 2009 at 1:21 PM, Mir Ali <mirmurt...@gmail.com> wrote: > >> Did u do as Eric asked you to? Download the latest gnuradio svn tar and >> follow the install instructions. >> >> On Wed, Jan 28, 2009 at 2:52 PM, Tushar Patel <pateltusha...@gmail.com>wrote: >> >>> I found the linux/compiler.h file in other place, I gave the path in >>> fusb_linux.cc and able to run all make, check make, install make. >>> It will gererate the usrp_firmware.ihx file also but it will generate in >>> rev0 and rev1, I used the usrp-0.5 tar from your link. >>> still I do not able to detact my USRP hardware, >>> so that USRP tar is old or what, I do not able to resolve it >>> pl. guide me >>> >>> On Sun, Jan 25, 2009 at 9:07 PM, Eric Blossom <e...@comsec.com> wrote: >>> >>>> On Sun, Jan 25, 2009 at 05:14:55PM -0800, Tushar Patel wrote: >>>> > ---------- Forwarded message ---------- >>>> > From: Tushar Patel <pateltusha...@gmail.com> >>>> > Date: Fri, 23 Jan 2009 21:28:32 -0800 >>>> > Subject: problem with USRP >>>> > To: Eric Blossom <e...@comsec.com> >>>> > >>>> > Hi Eric, >>>> > I used the VM Ware player , on which i run my linux- UBUNTU-8.04 >>>> > I am able to configure all gnu software packages perfectly, I was able >>>> to >>>> > run "hello world" example. >>>> >>>> You appear to be compiling ancient code. >>>> >>>> Please use either the svn trunk or the latest tarball. >>>> >>>> http://gnuradio.org/trac/wiki/Download >>>> http://gnuradio.org/trac/wiki/BuildGuide >>>> >>>> Eric >>>> >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >> >> >> -- >> Mir Murtuza Ali >> Graduate Student >> Center for Wireless Communications >> University of Mississippi >> University, MS 38677 >> >> > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
