On Mon, Jan 26, 2009 at 11:15:15PM -0800, Yabo Li wrote:
> Hi,
>
> I tried to follow the instructions in "USRP2UserFAQ" to program the SD card
> with the bin files from http://gnuradio.org/releases/usrp2-bin/trunk/.
> (txrx.bin and u2_rev3.bin), there is no error message showing up. However,
> when I plug in the SD card into USRP2, and power on, I cannot get normal led
> lights as I usually get with the right SD card. Is there anyway to verify
> that I indeed programmed the SD card, or verify that what I programmed
> matches with the bin files? BTW, I am using a 2G SD card. Thanks!
>
> Regards,
> Yabo
$ u2_flash_tool --help
Usage: u2_flash_tool: [options] filename
Options:
-h, --help show this help message and exit
-w, --write write FILE to TARGET slot
-v, --verify verify FILE against TARGET slot
-r, --read read TARGET slot, write to FILE
-t TARGET, --target=TARGET
select TARGET slot from: fpga, s/w [default=s/w]
--dev=DEV specify flash device file, e.g., /dev/sdb. Be
careful!
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
