I have been able to view square waves down to 1 KHz with the usrp_oscope.
I do not use a daughterboard and I turned off the automatic DC offset. I
input the signal into pins 62 and 60 of connector J666, of the USRP, with
the use of appropriate coupling capacitor. I disabled the automatic DC
offset by adding the following code:
self.u = usrp.source_c() # usrp is data source
self.u.set_dc_offset_cl_enable(0x0, 0xf) # Turn off auto dc offset
I turned off the DC offset to get ride of a drop in the square wave. The
DC offset algorithm tries to remove what it considers DC signal and that
includes slow varying signals in the KHz range.
Original Message:
-----------------
From: sudhindra aithal kota [EMAIL PROTECTED]
Date: Fri, 18 Nov 2005 03:21:09 +0000 (GMT)
To: [EMAIL PROTECTED], discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] Viewing square wave in usrp_oscope
Hi,
Sorry for the previous mail. Totally out of context.
I gave a square wave input direct from a signal
generator and the behaviour of usrp_oscope was the
same as I had explained before. I increased the
frequency to way above 100KHz. Is there any other
option to be given?
Regards
Sudhindra
> Hi,
> Is it possible to view a square wave using
> usrp_oscope.py? I have a circuit which produces a
> square wave that I want to view.
Yes.
> I know usrp_oscope is not a general purpose
> oscilloscope. We eventually want to manipulate the
> signal coming from the circuit for our purposes. So
we
> wanted to know if it is represented properly.
> The square wave had spikes in it. It appeared more
> like a capacitor charging and discharging. And at
high
> frequencies, it resembles a sine wave. The signal
> coming from the circuit has a frequency of 41 KHz.
If you are using the Basic Rx daughterboard as your
input, the RF
transformer on it acts as a high pass filter.
Try using an input signal > 100kHz. A megahetz would
be even better.
> Has anyone tried working with a square wave before
> and faced this problem? Please let me know how to
> correct this. Thanks
The Basic USRP has a 50 Ohm input impedance.
Will your circuit drive 50 ohms?
Eric
__________________________________________________________
Enjoy this Diwali with Y! India Click here
http://in.promos.yahoo.com/fabmall/index.html
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
