Following up on Arv's comment. I can place a connection point from the Electric palette on the point of a resistor winding, group the resistor and connection point symbol (as opposed to an internal connection point of a symbol) together, and a line will snap to the connection point symbol and travel with the grouped resistor and point. Which demonstrates the fact that connection points of a group are the same as the individual elements from which it is made.
On Tue, Dec 28, 2010 at 5:24 PM, Arv Evans <arvid.ev...@gmail.com> wrote: > Hello > > One reason for having resistors, and other electronic components, snap to > the grid is to make it easy to snap a connecting line or component to the > end of that resistor. For this reason it makes more sense for the resistor > ends to snap to the grid than to have it's center snap to the grid. One > exception is when making a variable resistor using American drawing method > where an arrowed line connects to the side of a resistor at mid-point. In > this case one has to live with the arrowed tap line snapping to the center > point, or make the grid field fine enough that the arrowed line can snap to > a point along one side of the resistor's zig-zag line. > > [image: [ se attached Screenshot-1 ]] > > Arv K7HKL > _._ > > > > On 12/28/2010 03:05 PM, Michael Ross wrote: > > If I place a resistor, and then a zig zag line, then I move an end of the > zzline near an end point of the resistor the resistor get a red outline > indicating there is a connection between the "grips," if I let the line go > while the red outline is present then when I move the resistor the line > tracks it. If I move the line the resistor does not track the line. > > The four extents for the resistor symbol snap to the grid. If you want > the center of the resistor to snap exactly just so to the grid, you will > have to size the grid so that when you place a corner the leg of the > resistor is on a grid line. > > Sorry you don't like this functionality, but it makes sense to me, the > grid is essentially arbitrary so there is no particular reason why the > symbols should be constrained to it. If you really need it to be just so > then you can control the size and shape of the symbol and grid to produce > the result you are after. I prefer the more general solution that is > implemented where any symbol of any size has connection points to which a > line will glom onto it and move with the symbol. > > If you can make a good case for the function you want, then perhaps the > developers will be able to implement it. or you can implement it yourself. > This is free open source software so you can learn to program it to do as > you wish. > > On Tue, Dec 28, 2010 at 4:49 PM, Chris G <c...@isbd.net> wrote: > >> I'm finding some of the component objects in dia (like the resistor >> objects) very annoying to use because the centre of the the object >> doesn't snap to grid. >> >> I.e. if you get a resistor and shrink it to be fairly small then it's >> the top edge of the resistor that snaps to the grid which is quite >> useless when you have circuit wired on the grid as you can't connect the >> wires to the resistor. >> >> Is there any way to change the resistor (and other object's) properties >> so that the centre of the object snaps to the grid? >> >> -- >> Chris Green >> _______________________________________________ >> dia-list mailing list >> dia-list@gnome.org >> http://mail.gnome.org/mailman/listinfo/dia-list >> FAQ at http://live.gnome.org/Dia/Faq >> Main page at http://live.gnome.org/Dia >> >> > > > -- > Michael E. Ross > NC Solar Center Test Laboratory > ================================= > (919) 576-0824<https://www.google.com/voice/b/0?pli=1#phones> > best > > (919) 631-1451 cell > (919) 513-0418 desk > michael_r...@ncsu.edu > michael.e.r...@gmail.com > ============================= > > > NC Solar Center : www.ncsc.ncsu.edu > Professional Directory : www.greenprofessionals.org > > "The information in this email is provided by the NC Solar Center at NCSU > as a public service. The Solar Center strives to provide accurate > information, but does not warrant or represent the accuracy, usefulness or > reliability of this information. For specific advice, we always recommend > that you consult with a professional in the appropriate profession for your > needs." Email correspondence to and from this address may be subject to the > North Carolina Public Record Law NCGS, Ch 132 and may be disclosed to third > parties > > > _______________________________________________ > dia-list mailing > listdia-l...@gnome.orghttp://mail.gnome.org/mailman/listinfo/dia-list > FAQ at http://live.gnome.org/Dia/Faq > Main page at http://live.gnome.org/Dia > > > _______________________________________________ > dia-list mailing list > dia-list@gnome.org > http://mail.gnome.org/mailman/listinfo/dia-list > FAQ at http://live.gnome.org/Dia/Faq > Main page at http://live.gnome.org/Dia > > > -- Michael E. Ross NC Solar Center Test Laboratory ================================= (919) 576-0824<https://www.google.com/voice/b/0?pli=1#phones> best (919) 631-1451 cell (919) 513-0418 desk michael_r...@ncsu.edu michael.e.r...@gmail.com ============================= NC Solar Center : www.ncsc.ncsu.edu Professional Directory : www.greenprofessionals.org "The information in this email is provided by the NC Solar Center at NCSU as a public service. The Solar Center strives to provide accurate information, but does not warrant or represent the accuracy, usefulness or reliability of this information. For specific advice, we always recommend that you consult with a professional in the appropriate profession for your needs." Email correspondence to and from this address may be subject to the North Carolina Public Record Law NCGS, Ch 132 and may be disclosed to third parties
<<Screenshot-1.png>>
_______________________________________________ dia-list mailing list dia-list@gnome.org http://mail.gnome.org/mailman/listinfo/dia-list FAQ at http://live.gnome.org/Dia/Faq Main page at http://live.gnome.org/Dia
