Should this work? in path /sys/devices/platform/reg-userspace-consumer.0 [nemo@localhost reg-userspace-consumer.0]$ echo 1 > state -bash: state: Lupa evätty
or need root access? ________________________________ Lähettäjä: devel-boun...@lists.sailfishos.org [devel-boun...@lists.sailfishos.org] käyttäjän Kimmo Lindholm [kimmo.lindh...@eke.fi] puolesta Lähetetty: 23. joulukuuta 2013 18:20 Vastaanottaja: Sailfish OS Developers Aihe: Re: [SailfishDevel] The Other Half I2C Then I have to just sit and wait. Or is there any magic that I can store to the eeprom to keep it active? -kimmo From: devel-boun...@lists.sailfishos.org [mailto:devel-boun...@lists.sailfishos.org] On Behalf Of Jonni Rainisto Sent: Monday, December 23, 2013 6:06 PM To: Sailfish OS Developers Subject: Re: [SailfishDevel] The Other Half I2C NOTE: This API is not supported in initial Jolla device software. It will be available from 1.0.2.* and later Sailfish OS releases. # Enable VDD echo 1 > /sys/devices/platform/reguserspaceconsumer.0/state # Disable VDD echo 0 > /sys/devices/platform/reguserspaceconsumer.0/state So unfortunately you have to wait for next update before you can unable 3.3V pin from user space. But that should happen 'soon'... ________________________________ From: devel-boun...@lists.sailfishos.org [devel-boun...@lists.sailfishos.org] on behalf of Kimmo Lindholm [kimmo.lindh...@eke.fi] Sent: Monday, December 23, 2013 4:49 PM To: devel@lists.sailfishos.org Subject: [SailfishDevel] The Other Half I2C Anchors aweigh! Just hooked up scope to I2C bus on pogo pins, and there is life! Can someone point me in correct direction to enable 3.3V pin? 3.3V seems to be active just for a while when I press the cover detector switch and after eeprom in address 0x50 is tested 3.3V is gone.
_______________________________________________ SailfishOS.org Devel mailing list
