Hi,
no worries.. did you by chance install to another directory than before?
Even if you did not, let's try the following:
Exit from qtcreator if you have it running and then remove the config
directory, which is in Linux and mac in ~/.config/SailfishAlpha3
The config directory contains qtcreator specific settings for the
Sailfish SDK and it might have some wrong settings from a previous
installation. The config directory is created when qtcreator is run the
first time.
You can just remove the whole directory, then start qtcreator again and
see if that helped.
If that didn't help, then exit from qtcreator, remove the
~/.config/SailfishAlpha3 directory again and uninstall the whole SDK and
run the installer once more.
If the "1310" SDK worked for you, the "1312" should work too. Nothing
fundamental has changed.
Best regards,
Juha
On 13.12.2013 22:40, christopher.l...@thurweb.ch wrote:
Hi Juha
I have to confess that I upgraded via the maintenance tool.
Now I have done a complete de-install, including removing the hidden
.scratchbox2 directory.
Then I re-downloaded and installed from
https://sailfishos.org/develop.html
Now I have a QtCreator that has no kits or Qt Versions.
The hole is getting deeper and we are still digging.
It is very definitely Friday the 13th
Chris
Zitat von "Juha Kallioinen" <juha.kallioi...@jolla.com>:
On 13.12.2013 18:32, christopher.l...@thurweb.ch wrote:
Hi
I upgraded the SDK on my Mac with today's release.
However the build of my current project now fails with:
Problem: nothing provides libgudev-1.0.so.0 needed by
upower-0.9.21+git1-1.1.1.i486
Solution 1: do not install telepathy-ring-devel-2.3.12-1.7.1.i486
Solution 2: break upower-0.9.21+git1-1.1.1.i486 by ignoring some of
its dependencies
Hi,
looks like the package repositories have not been fully refreshed in
your SDK. The telepathy-ring-devel version in the latest repository
is telepathy-ring-devel-2.3.16-1.7.1.i486.rpm
I just tested it on my Mac and verified that I can install
telepathy-ring-devel.
The Build Engine should refresh its repositories five minutes after
it has been started. Could you reboot the MerSDK build engine and
wait about 10 minutes, then try building again.
Maybe something in the upgrade went wrong, it is recommended to first
remove the old SDK and then install the "1312" version from a new
installer.
Best regards,
Juha
_______________________________________________
SailfishOS.org Devel mailing list
.
_______________________________________________
SailfishOS.org Devel mailing list
