On 1/24/24 10:47, Laszlo Ersek wrote:
On 1/24/24 16:31, Gerd Hoffmann wrote:
Neat when doing ResetVector coding.
Signed-off-by: Gerd Hoffmann <kra...@redhat.com>
---
OvmfPkg/ResetVector/DebugCon.asm | 43 +++++++++++++++++++++++++++
OvmfPkg/ResetVector/ResetVector.nasmb | 2 +-
2 files changed, 44 insertions(+), 1 deletion(-)
create mode 100644 OvmfPkg/ResetVector/DebugCon.asm
diff --git a/OvmfPkg/ResetVector/DebugCon.asm b/OvmfPkg/ResetVector/DebugCon.asm
new file mode 100644
index 000000000000..9c57d1a52c75
--- /dev/null
+++ b/OvmfPkg/ResetVector/DebugCon.asm
@@ -0,0 +1,43 @@
+;------------------------------------------------------------------------------
+; @file
+; qemu debug console support macros (based on serial port macros)
+;
+; Copyright (c) 2008 - 2018, Intel Corporation. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+;------------------------------------------------------------------------------
+
+%macro outToDebugPort 1
+ mov dx, 0x402
+ mov al, %1
+ out dx, al
+%endmacro
+
+%macro debugShowCharacter 1
+ outToDebugPort %1
+%endmacro
+
+%macro debugShowHexDigit 1
+ %if (%1 < 0xa)
+ debugShowCharacter BYTE ('0' + (%1))
+ %else
+ debugShowCharacter BYTE ('a' + ((%1) - 0xa))
+ %endif
+%endmacro
+
+%macro debugNewline 0
+ debugShowCharacter `\r`
+ debugShowCharacter `\n`
+%endmacro
+
+%macro debugShowPostCode 1
+ debugShowHexDigit (((%1) >> 4) & 0xf)
+ debugShowHexDigit ((%1) & 0xf)
+ debugNewline
+%endmacro
+
+BITS 16
+
+%macro debugInitialize 0
+ ; not required
+%endmacro
diff --git a/OvmfPkg/ResetVector/ResetVector.nasmb
b/OvmfPkg/ResetVector/ResetVector.nasmb
index 5832aaa8abf7..f1655ddfcde3 100644
--- a/OvmfPkg/ResetVector/ResetVector.nasmb
+++ b/OvmfPkg/ResetVector/ResetVector.nasmb
@@ -41,7 +41,7 @@
%elifdef DEBUG_SERIAL
%include "SerialDebug.asm"
%else
- %include "DebugDisabled.asm"
+ %include "DebugCon.asm"
%endif
%include "Ia32/SearchForBfvBase.asm"
(1) How much output does this produce? Trapping to QEMU for every single
character written to the debug console is very slow. If it only produces
a few bytes, that should be OK.
(2) debugInitialize could actually be put to use; the presence of the
QEMU debug console is detectable. We'd need to allocate a single byte
somewhere, detect the console in debugInitialize, save the result in
that byte, then check the byte in debugShowPostCode. Eliminates even
those few (?) traps if there is no debug console configured.
(3) I'm already hating myself for asking about this, but... is there a
way for only customizing debugInitialize and debugShowCharacter? The
rest is common with "SerialDebug.asm", and I wish I hadn't had to review
those (unchanged) macros, they make my eyes bleed :/
Anyway, if you think any of these (or all of these!) means too much
work, I'm OK with the patch going-in as is.
My concern would be around SEV-ES/SEV-SNP guest usage. The in and out
instruction will generate a #VC and would require a #VC handler to be in
place.
I'm pretty sure this will cause issues for those types of guests, but it
might be a few days before I can get to it to verify. @Gerd, were you able
to test this with those types of guests?
Thanks,
Tom
I'm a bit concerned about (1), TBH.
Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#114350): https://edk2.groups.io/g/devel/message/114350
Mute This Topic: https://groups.io/mt/103933942/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
