[AMD Official Use Only - General] Thanks for catching these typos in patches. V2 is sent to address them.
Abner > -----Original Message----- > From: Oram, Isaac W <isaac.w.o...@intel.com> > Sent: Friday, January 13, 2023 8:11 AM > To: devel@edk2.groups.io; Chang, Abner <abner.ch...@amd.com> > Cc: Wang, Jian J <jian.j.w...@intel.com>; Gao, Liming > <gaolim...@byosoft.com.cn>; Nickle Wang <nick...@nvidia.com>; Igor > Kulchytskyy <ig...@ami.com>; Desimone, Nathaniel L > <nathaniel.l.desim...@intel.com> > Subject: RE: [edk2-devel] [PATCH 1/3] MdeModulePkg/Include: Add > IpmiCommandLib header file > > Caution: This message originated from an External Source. Use proper > caution when opening attachments, clicking links, or responding. > > > Reviewed-by: Isaac Oram <isaac.w.o...@intel.com> > > Typos in SetPowerRestireRequest and SetPowerRestireResponse in function > comment block and parameters. > 35 instances of successly should perhaps be successfully. > 344: NetFnChasis should perhaps be NetFnChassis. > > Regards, > Isaac > > -----Original Message----- > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Chang, > Abner via groups.io > Sent: Tuesday, December 27, 2022 8:59 PM > To: devel@edk2.groups.io > Cc: Wang, Jian J <jian.j.w...@intel.com>; Gao, Liming > <gaolim...@byosoft.com.cn>; Nickle Wang <nick...@nvidia.com>; Igor > Kulchytskyy <ig...@ami.com>; Oram, Isaac W <isaac.w.o...@intel.com>; > Desimone, Nathaniel L <nathaniel.l.desim...@intel.com> > Subject: [edk2-devel] [PATCH 1/3] MdeModulePkg/Include: Add > IpmiCommandLib header file > > From: Abner Chang <abner.ch...@amd.com> > > Add IpmiCommandLib to MdeModulePkg. This header file is copied from > edk2-platforms/Features/Intel/OutOfBandManagement/ > IpmiFeaturePkg\Include\Library. Having this header file in > edk2 to avoid the dependence of edk2 module with edk2-platfrom. > The NULL instance of IpmiCommandLib under MdeModulePkg has to be > implemented for the same reason. > IpmiCommandLib.h in edk2-platforms should be removed once this patch set > is merged. Expect no impacts on edk2-platforms because MdeModulePkg is > referred in INF file by all edk2 modules under edk2-platforms that use > IpmiCommandLib. > > Signed-off-by: Abner Chang <abner.ch...@amd.com> > Cc: Jian J Wang <jian.j.w...@intel.com> > Cc: Liming Gao <gaolim...@byosoft.com.cn> > Cc: Nickle Wang <nick...@nvidia.com> > Cc: Igor Kulchytskyy <ig...@ami.com> > Cc: Isaac Oram <isaac.w.o...@intel.com> > Cc: Nate DeSimone <nathaniel.l.desim...@intel.com> > --- > MdeModulePkg/Include/Library/IpmiCommandLib.h | 683 > ++++++++++++++++++ > 1 file changed, 683 insertions(+) > create mode 100644 MdeModulePkg/Include/Library/IpmiCommandLib.h > > diff --git a/MdeModulePkg/Include/Library/IpmiCommandLib.h > b/MdeModulePkg/Include/Library/IpmiCommandLib.h > new file mode 100644 > index 00000000000..cac8123411f > --- /dev/null > +++ b/MdeModulePkg/Include/Library/IpmiCommandLib.h > @@ -0,0 +1,683 @@ > +/** @file > + This library abstract how to send/receive IPMI command. > + > +Copyright (c) 2018-2021, Intel Corporation. All rights reserved.<BR> > +Copyright (C) 2022 Advanced Micro Devices, Inc. All rights > +reserved.<BR> > + > +SPDX-License-Identifier: BSD-2-Clause-Patent > + > +**/ > + > +#ifndef IPMI_COMMAND_LIB_H_ > +#define IPMI_COMMAND_LIB_H_ > + > +#include <Uefi.h> > +#include <IndustryStandard/Ipmi.h> > + > +// > +// IPMI NetFnApp > +// > + > +/** > + This function gets the IPMI Device ID. > + > + @param[out] DeviceId Get device ID response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetDeviceId ( > + OUT IPMI_GET_DEVICE_ID_RESPONSE *DeviceId > + ); > + > +/** > + This function gets the self-test result. > + > + @param[out] SelfTestResult Self test command response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSelfTestResult ( > + OUT IPMI_SELF_TEST_RESULT_RESPONSE *SelfTestResult > + ); > + > +/** > + This function resets watchdog timer. > + > + @param[out] CompletionCode The command completion code. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiResetWatchdogTimer ( > + OUT UINT8 *CompletionCode > + ); > + > +/** > + This function sets watchdog timer. > + > + @param[in] SetWatchdogTimer Set watchdog timer request. > + @param[out] CompletionCode The command completion code. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiSetWatchdogTimer ( > + IN IPMI_SET_WATCHDOG_TIMER_REQUEST *SetWatchdogTimer, > + OUT UINT8 *CompletionCode > + ); > + > +/** > + This function gets watchdog timer. > + > + @param[out] GetWatchdogTimer Get watchdog timer response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetWatchdogTimer ( > + OUT IPMI_GET_WATCHDOG_TIMER_RESPONSE *GetWatchdogTimer > + ); > + > +/** > + This function sets BMC global enables. > + > + @param[in] SetBmcGlobalEnables Set BMC global enables command > request. > + @param[out] CompletionCode The command completion code. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiSetBmcGlobalEnables ( > + IN IPMI_SET_BMC_GLOBAL_ENABLES_REQUEST *SetBmcGlobalEnables, > + OUT UINT8 *CompletionCode > + ); > + > +/** > + This function gets BMC global enables. > + > + @param[out] GetBmcGlobalEnables Get BMC global enables command > response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetBmcGlobalEnables ( > + OUT IPMI_GET_BMC_GLOBAL_ENABLES_RESPONSE > *GetBmcGlobalEnables > + ); > + > +/** > + This function clears message flag. > + > + @param[in] ClearMessageFlagsRequest Clear message flags command > request. > + @param[out] CompletionCode The command completion code. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiClearMessageFlags ( > + IN IPMI_CLEAR_MESSAGE_FLAGS_REQUEST *ClearMessageFlagsRequest, > + OUT UINT8 *CompletionCode > + ); > + > +/** > + This function gets message flag. > + > + @param[out] GetMessageFlagsResponse Get message flags response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetMessageFlags ( > + OUT IPMI_GET_MESSAGE_FLAGS_RESPONSE > *GetMessageFlagsResponse > + ); > + > +/** > + This function gets message. > + > + @param[out] GetMessageResponse Get message command > response. > + @param[in,out] GetMessageResponseSize The size of get message > response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetMessage ( > + OUT IPMI_GET_MESSAGE_RESPONSE *GetMessageResponse, > + IN OUT UINT32 *GetMessageResponseSize > + ); > + > +/** > + This function sends message. > + > + @param[in] SendMessageRequest The send message command > request. > + @param[in] SendMessageRequestSize The size of the send message > command request. > + @param[out] SendMessageResponse The send message command > response. > + @param[in,out] SendMessageResponseSize The size of the send > message command response. > + When input, the expected size of > response. > + When output, the actual size of > response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiSendMessage ( > + IN IPMI_SEND_MESSAGE_REQUEST *SendMessageRequest, > + IN UINT32 SendMessageRequestSize, > + OUT IPMI_SEND_MESSAGE_RESPONSE *SendMessageResponse, > + IN OUT UINT32 *SendMessageResponseSize > + ); > + > +/** > + This function gets the system UUID. > + > + @param[out] SystemGuid The pointer to retrieve system UUID. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Others Other errors. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSystemUuid ( > + OUT EFI_GUID *SystemGuid > + ); > + > +/** > + This function gets the channel information. > + > + @param[in] GetChannelInfoRequest The get channel information > request. > + @param[in] GetChannelInfoResponse The get channel information > response. > + @param[in,out] GetChannelInfoResponseSize When input, the expected > size of response. > + When output, the exact size of > the returned > + response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetChannelInfo ( > + IN IPMI_GET_CHANNEL_INFO_REQUEST *GetChannelInfoRequest, > + OUT IPMI_GET_CHANNEL_INFO_RESPONSE *GetChannelInfoResponse, > + OUT UINT32 *GetChannelInfoResponseSize > + ); > + > +// > +// IPMI NetFnTransport > +// > + > +/** > + This function activates SOL > + > + @param[in] SolActivatingRequest SOL activating request. > + @param[out] CompletionCode The command completion code. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiSolActivating ( > + IN IPMI_SOL_ACTIVATING_REQUEST *SolActivatingRequest, > + OUT UINT8 *CompletionCode > + ); > + > +/** > + This function sets SOL configuration parameters. > + > + @param[in] SetConfigurationParametersRequest Set SOL > configuration parameters > + command request. > + @param[in] SetConfigurationParametersRequestSize Size of the set > SOL configuration > + parameters command > request. > + @param[out] CompletionCode The command > completion > code. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiSetSolConfigurationParameters ( > + IN IPMI_SET_SOL_CONFIGURATION_PARAMETERS_REQUEST > *SetConfigurationParametersRequest, > + IN UINT32 > SetConfigurationParametersRequestSize, > + OUT UINT8 *CompletionCode > + ); > + > +/** > + This function gets SOL configuration parameters. > + > + @param[in] GetConfigurationParametersRequest Get SOL > configuration parameters > + command request. > + @param[out] GetConfigurationParametersResponse Get SOL > configuration parameters > + response. > + @param[in,out] GetConfigurationParametersResponseSize When input, > the size of the expected > + response. > + When output, the > exact size of > + expect response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSolConfigurationParameters ( > + IN IPMI_GET_SOL_CONFIGURATION_PARAMETERS_REQUEST > *GetConfigurationParametersRequest, > + OUT IPMI_GET_SOL_CONFIGURATION_PARAMETERS_RESPONSE > *GetConfigurationParametersResponse, > + IN OUT UINT32 > *GetConfigurationParametersResponseSize > + ); > + > +/** > + This function gets the LAN configuration parameter. > + > + @param[in] GetLanConfigurationParametersRequest Get LAN > configuration parameters command request. > + @param[in] GetLanConfigurationParametersResponse The response of > the get LAN configuration parameters. > + @param[in,out] GetLanConfigurationParametersSize When input, the > expected size of response data. > + When out, the exact > size of response data. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > + > +EFI_STATUS > +EFIAPI > +IpmiGetLanConfigurationParameters ( > + IN IPMI_GET_LAN_CONFIGURATION_PARAMETERS_REQUEST > *GetLanConfigurationParametersRequest, > + OUT IPMI_GET_LAN_CONFIGURATION_PARAMETERS_RESPONSE > *GetLanConfigurationParametersResponse, > + IN OUT UINT32 > *GetLanConfigurationParametersSize > + ); > + > +// > +// IPMI NetFnChasis > +// > + > +/** > + This function gets chassis capability. > + > + @param[out] GetChassisCapabilitiesResponse Gets chassis capability > command response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetChassisCapabilities ( > + OUT IPMI_GET_CHASSIS_CAPABILITIES_RESPONSE > +*GetChassisCapabilitiesResponse > + ); > + > +/** > + This function gets chassis status. > + > + @param[out] GetChassisCapabilitiesResponse The get chassis status > command response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetChassisStatus ( > + OUT IPMI_GET_CHASSIS_STATUS_RESPONSE *GetChassisStatusResponse > + ); > + > +/** > + This function sends chassis control request. > + > + @param[in] ChassisControlRequest The chassis control request. > + @param[out] CompletionCode The command completion code. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiChassisControl ( > + IN IPMI_CHASSIS_CONTROL_REQUEST *ChassisControlRequest, > + OUT UINT8 *CompletionCode > + ); > + > +/** > + This function sets power restore policy. > + > + @param[in] SetPowerRestireRequest The set power restore policy > control > + command request. > + @param[out] SetPowerRestireResponse The response of power restore > policy. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiSetPowerRestorePolicy ( > + IN IPMI_SET_POWER_RESTORE_POLICY_REQUEST > *SetPowerRestireRequest, > + OUT IPMI_SET_POWER_RESTORE_POLICY_RESPONSE > *SetPowerRestireResponse > + ); > + > +// > +// IPMI NetFnStorage > +// > + > +/** > + This function sets system boot option. > + > + @param[in] BootOptionsRequest Set system boot option request. > + @param[out] BootOptionsResponse The response of set system boot > + option request. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiSetSystemBootOptions ( > + IN IPMI_SET_BOOT_OPTIONS_REQUEST *BootOptionsRequest, > + OUT IPMI_SET_BOOT_OPTIONS_RESPONSE *BootOptionsResponse > + ); > + > +/** > + This function gets system boot option. > + > + @param[in] BootOptionsRequest Get system boot option request. > + @param[out] BootOptionsResponse The response of get system boot > + option request. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSystemBootOptions ( > + IN IPMI_GET_BOOT_OPTIONS_REQUEST *BootOptionsRequest, > + OUT IPMI_GET_BOOT_OPTIONS_RESPONSE *BootOptionsResponse > + ); > + > +/** > + This function gets FRU inventory area info. > + > + @param[in] GetFruInventoryAreaInfoRequest Get FRU inventory area > command request. > + @param[out] GetFruInventoryAreaInfoResponse get FRU inventory area > command response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetFruInventoryAreaInfo ( > + IN IPMI_GET_FRU_INVENTORY_AREA_INFO_REQUEST > *GetFruInventoryAreaInfoRequest, > + OUT IPMI_GET_FRU_INVENTORY_AREA_INFO_RESPONSE > +*GetFruInventoryAreaInfoResponse > + ); > + > +/** > + This function reads FRU data. > + > + @param[in] ReadFruDataRequest Read FRU data command request. > + @param[out] ReadFruDataResponse Read FRU data command > response. > + @param[in,out] ReadFruDataResponseSize Size of the read FRU data > response. > + When input, the expected size of > response data. > + When out, the exact size of > response data. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiReadFruData ( > + IN IPMI_READ_FRU_DATA_REQUEST *ReadFruDataRequest, > + OUT IPMI_READ_FRU_DATA_RESPONSE *ReadFruDataResponse, > + IN OUT UINT32 *ReadFruDataResponseSize > + ); > + > +/** > + This function gets chassis capability. > + > + @param[in] WriteFruDataRequest Write FRU data command request. > + @param[in] WriteFruDataRequestSize Size of the write FRU data > command request. > + @param[out] WriteFruDataResponse Write FRU data response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiWriteFruData ( > + IN IPMI_WRITE_FRU_DATA_REQUEST *WriteFruDataRequest, > + IN UINT32 WriteFruDataRequestSize, > + OUT IPMI_WRITE_FRU_DATA_RESPONSE *WriteFruDataResponse > + ); > + > +/** > + This function gets SEL information. > + > + @param[out] GetSelInfoResponse Get SEL information command > response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSelInfo ( > + OUT IPMI_GET_SEL_INFO_RESPONSE *GetSelInfoResponse > + ); > + > +/** > + This function gets SEL entry. > + > + @param[in] GetSelEntryRequest Get SEL entry command request. > + @param[out] GetSelEntryResponse Get SEL entry command response. > + @param[in,out] GetSelEntryResponseSize Size of Get SEL entry request. > + When input, the expected size of > response data. > + When out, the exact size of > response data. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSelEntry ( > + IN IPMI_GET_SEL_ENTRY_REQUEST *GetSelEntryRequest, > + OUT IPMI_GET_SEL_ENTRY_RESPONSE *GetSelEntryResponse, > + IN OUT UINT32 *GetSelEntryResponseSize > + ); > + > +/** > + This function adds SEL entry. > + > + @param[in] AddSelEntryRequest Add SEL entry command request. > + @param[out] AddSelEntryResponse Add SEL entry command response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiAddSelEntry ( > + IN IPMI_ADD_SEL_ENTRY_REQUEST *AddSelEntryRequest, > + OUT IPMI_ADD_SEL_ENTRY_RESPONSE *AddSelEntryResponse > + ); > + > +/** > + This function partially adds SEL entry. > + > + @param[in] PartialAddSelEntryRequest Partial add SEL entry command > request. > + @param[in] PartialAddSelEntryRequestSize Size of partial add SEL entry > command request. > + @param[out] PartialAddSelEntryResponse Partial add SEL entry > command response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiPartialAddSelEntry ( > + IN IPMI_PARTIAL_ADD_SEL_ENTRY_REQUEST > *PartialAddSelEntryRequest, > + IN UINT32 PartialAddSelEntryRequestSize, > + OUT IPMI_PARTIAL_ADD_SEL_ENTRY_RESPONSE > *PartialAddSelEntryResponse > + ); > + > +/** > + This function clears SEL entry. > + > + @param[in] ClearSelRequest Clear SEL command request. > + @param[out] ClearSelResponse Clear SEL command response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiClearSel ( > + IN IPMI_CLEAR_SEL_REQUEST *ClearSelRequest, > + OUT IPMI_CLEAR_SEL_RESPONSE *ClearSelResponse > + ); > + > +/** > + This function gets SEL time. > + > + @param[out] GetSelTimeResponse Get SEL time command response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSelTime ( > + OUT IPMI_GET_SEL_TIME_RESPONSE *GetSelTimeResponse > + ); > + > +/** > + This function sets SEL time. > + > + @param[in] SetSelTimeRequest Set SEL time command request. > + @param[out] CompletionCode Command completion code. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiSetSelTime ( > + IN IPMI_SET_SEL_TIME_REQUEST *SetSelTimeRequest, > + OUT UINT8 *CompletionCode > + ); > + > +/** > + This function gets SDR repository information. > + > + @param[out] GetSdrRepositoryInfoResp Get SDR repository response. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSdrRepositoryInfo ( > + OUT IPMI_GET_SDR_REPOSITORY_INFO_RESPONSE > *GetSdrRepositoryInfoResp > + ); > + > +/** > + This function gets SDR > + > + @param[in] GetSdrRequest Get SDR resquest. > + @param[out] GetSdrResponse Get SDR response. > + @param[in,out] GetSdrResponseSize The size of get SDR response. > + When input, the expected size of > response data. > + When out, the exact size of > response data. > + > + @retval EFI_SUCCESS Command is sent successly. > + @retval EFI_NOT_AVAILABLE_YET Transport interface is not ready yet. > + @retval Other Failure. > + > +**/ > +EFI_STATUS > +EFIAPI > +IpmiGetSdr ( > + IN IPMI_GET_SDR_REQUEST *GetSdrRequest, > + OUT IPMI_GET_SDR_RESPONSE *GetSdrResponse, > + IN OUT UINT32 *GetSdrResponseSize > + ); > + > +#endif > -- > 2.37.1.windows.1 > > > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#98444): https://edk2.groups.io/g/devel/message/98444 Mute This Topic: https://groups.io/mt/95915732/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
