On Wed, 22 Jun 2022 at 17:38, Thomas Abraham <thomas.abra...@arm.com> wrote: > > For Arm platforms that support more that one serial port, one of the > serial port can be used for connecting debuggers such as WinDbg. There > are PCDs that allow the base address and clock rate to be specified for > this debug serial port but not its interrupt number. So add a PCD to > specify the interrupt number assigned to the serial debug port > controller. > > Signed-off-by: Thomas Abraham <thomas.abra...@arm.com> > --- > ArmPlatformPkg/ArmPlatformPkg.dec | 1 + > 1 file changed, 1 insertion(+) > > Changes since v1 > - Updated commit message and removed the Change-Id line as suggested by > Ard. >
Reviewed-by: Ard Biesheuvel <a...@kernel.org> Merged as #3001. > diff --git a/ArmPlatformPkg/ArmPlatformPkg.dec > b/ArmPlatformPkg/ArmPlatformPkg.dec > index 3a25ddcdc8..dd6e78f62a 100644 > --- a/ArmPlatformPkg/ArmPlatformPkg.dec > +++ b/ArmPlatformPkg/ArmPlatformPkg.dec > @@ -94,6 +94,7 @@ > > gArmPlatformTokenSpaceGuid.PcdSerialDbgRegisterBase|0x00000000|UINT64|0x00000030 > > gArmPlatformTokenSpaceGuid.PcdSerialDbgUartBaudRate|0x00000000|UINT64|0x00000031 > > gArmPlatformTokenSpaceGuid.PcdSerialDbgUartClkInHz|0x00000000|UINT32|0x00000032 > + > gArmPlatformTokenSpaceGuid.PcdSerialDbgInterrupt|0x00000000|UINT32|0x00000041 > > ## PL061 GPIO > gArmPlatformTokenSpaceGuid.PcdPL061GpioBase|0x0|UINT32|0x00000025 > -- > 2.17.1 > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#90692): https://edk2.groups.io/g/devel/message/90692 Mute This Topic: https://groups.io/mt/91924413/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
