For Arm platforms that support more that one serial port, one of the serial port can be used for connecting debuggers such as WinDbg. There are PCDs that allow the base address and clock rate to be specified for this debug serial port but not its interrupt number. So add a PCD to specify the interrupt number assigned to the serial debug port controller.
Signed-off-by: Thomas Abraham <thomas.abra...@arm.com> --- ArmPlatformPkg/ArmPlatformPkg.dec | 1 + 1 file changed, 1 insertion(+) Changes since v1 - Updated commit message and removed the Change-Id line as suggested by Ard. diff --git a/ArmPlatformPkg/ArmPlatformPkg.dec b/ArmPlatformPkg/ArmPlatformPkg.dec index 3a25ddcdc8..dd6e78f62a 100644 --- a/ArmPlatformPkg/ArmPlatformPkg.dec +++ b/ArmPlatformPkg/ArmPlatformPkg.dec @@ -94,6 +94,7 @@ gArmPlatformTokenSpaceGuid.PcdSerialDbgRegisterBase|0x00000000|UINT64|0x00000030 gArmPlatformTokenSpaceGuid.PcdSerialDbgUartBaudRate|0x00000000|UINT64|0x00000031 gArmPlatformTokenSpaceGuid.PcdSerialDbgUartClkInHz|0x00000000|UINT32|0x00000032 + gArmPlatformTokenSpaceGuid.PcdSerialDbgInterrupt|0x00000000|UINT32|0x00000041 ## PL061 GPIO gArmPlatformTokenSpaceGuid.PcdPL061GpioBase|0x0|UINT32|0x00000025 -- 2.17.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#90689): https://edk2.groups.io/g/devel/message/90689 Mute This Topic: https://groups.io/mt/91924413/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
